752 / 1562
4/24
Digital depth gauge calipers
ISO
13385-1
INOX
IP 67
Absolute
function
Certificate
opto
RS232
DIN
862
INOX
IP 54
Absolute
function
opto
RS232
Design:
Made of stainless steel, hardened. Retrofitted for wireless data
transfer with transmitter module TLC TWIN as well as receiver TWIN
station. Range between instrument and receiver is 12 m. Digit height of
LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after
2 hours. Upgradeable to interface port with USB or Digimatic, protec-
tion remains with cable connection. Supplied with battery CR 2032,
3 V, in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock for setting zero positi-
on, re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB (Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC (Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station available upon request.
Order
No.
Measurement range
mm
4084
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0301
300
534.00
0.01 mm (0.0005 inch)
150
15 x 4
0501
500
629.00
0.01 mm (0.0005 inch)
150
15 x 4
(495)
Digital depth gauge calipers TWIN-Cal with stepped measuring rod
Design:
Made of stainless steel, hardened. Retrofitted for wireless data
transfer with transmitter module TLC TWIN as well as receiver TWIN
station. Range between instrument and receiver is 12 m. Digit height of
LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after
2 hours. Upgradeable to interface port with USB or Digimatic, protection
remains with cable connection. Supplied with battery CR 2032, 3 V,
in plastic case.
Function:
On and automatic off switch, mm/inch switching, automatic
switching by means of slider movement, key lock set for zero position,
re-zeroing after switching deleted (absolute system), reset (zeroing)
possible at each position. Unique extension for data transmission with
TWIN connection (TLC) is possible.
Note:
Replacement battery
(Order No. 4027 2032,
Ç
4/12).
Cable TLC-USB
(Order No. 4025 0015,
Ç
4/12).
Cable TLC-DIGIMATIC
(Order No. 4025 0020,
Ç
4/12).
Transmitter module TLC-TWIN (Order No. 4025 0025,
Ç
4/12).
Receiver TWIN station
available upon request.
Digital depth gauge calipers TWIN-Cal with double-sided stepped measuring rod
Order
No.
Measurement range
mm
4082
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0301
300
667.00
0.01 mm (0.0005 inch)
150
15 x 4
(495)
Design:
Made of stainless steel, hardened, measuring faces precision
ground and hardened, with locking screw, digit height of LCD 8 mm,
with data output Opto RS 232. Supplied with battery CR 2032, 3 V,
in plastic case.
Function:
On and automatic off switch, mm/inch-conversion,
ABS (absolute and relative measurements), zero setting possible
in any position.
Note:
Replacement battery (Order No. 4027 2032,
Ç
4/12).
Data cable
(Order No. 4025 0002,
Ç
4/11).
Digital depth gauge calipers with stepped measuring rod
Order
No.
Measurement range
mm
4096
Reading
Bridge length
mm
Cross-section of the measuring bar
mm
0300
300
149.00
0.01 mm (0.0005 inch)
150
12 x 4
0500
500
282.00
0.01 mm (0.0005 inch)
150
12 x 4
(435)
m
m
m
ISO
13385-1
INOX
IP 67
Absolute
function
Certificate
opto
RS232
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
752