88 / 116
PAGE 88
PRICES SUBJECT TO CHANGEWITHOUT NOTICE
WORKHOLDING - TORX KEYS
Eight accurately hollow-ground screwdrivers
for take-down of many guns. Fit sight screws,
guard screws, floor plate, etc. Nicely finished,
spring steel blade in hardwood handle.
Pure Gum Surgical Latex tubing makes the
perfect clamping system
for the custom
knifemaker. The tighter you stretch it, the
more gripping power it has. Use the 1/4"
OD tubing for general use and the 5/16" OD
when maximum clamping power is needed.
Reusable
, will not break or deform under
normal conditions.
Ideal for irregular shapes
and repairing cracks and checks in wood
handles. Apply epoxy and wrap the tubing
around the knife pulling the wood back
together. Tubing will
hold tight
while curing.
After curing, remove the tubing and refinish
the handle. Epoxy simply peels away, as it
will not adhere to the tubing.
Sold in two pieces equalling 10ft. length. The
shortest piece will be at least 2ft in length.
Designed especially with the gunsmith in mind.
Red plastic handles, hollow ground blades for
scope sight and mount screws, plug screws,
side plate screws, guard screws, and general
purpose gun work. 8 pc. set includes the FP1,
FP2, FP3, FP4, FP5, FP14, FP15, FP16 in a
roll-up compartmented storage case.
CAT.#
SIZE
PRICE
HK102
.035
.50
HK103
.050
.50
HK104
1/16"
.50
HK105
5/64"
.50
HK106
3/32"
.50
HK107
7/64"
.50
HK108
1/8"
.50
HK109
9/64"
.50
HK110
5/32"
.50
Torx Set of 6
HK120
T6,T7,T8,T9,T10,T15
4.95
CAT.#
SIZE
PRICE
Hex Keys
CAT.#
DESCRIPTION
PRICE
GPHG8
8 pc General Set
36.95
CAT.#
DESCRIPTION
PRICE
FP8A
Forster 8 pc. set
42.95
These clamps are a must when gluing handles
or soldering guards or bolsters to your blade.
The round handle on the Kant Twist clamps
provide the ability to finely adjust the clamp
pressure to your project and makes it easy
to position your work. Clamps are small and
light weight. The free-floating jaws adjust to
unparallel surfaces, will not walk or twist when
pressure is applied. Outside measurements
and nominal clamping pressure of each clamp
is as follows: CL400 is 1 3/8" x 1 1/2" 200
lbs.; CL401 is 1 3/4" x 2" 350 lbs.; CL403 is
3" x 3 3/16" 600 lbs.; CL405 is 3 1/4 x 3 1/2"
800 lbs. The clamp opening determines the
thickest material you can clamp, the clamp
depth is the maximum distance you can
clamp from the edge.
CAT.#
OPENING DEPTH PRICE
CL400
3/4"
3/8"
11.95
CL401
1"
1/2"
12.95
CL403
1 1/2"
1 1/8"
13.95
CL405
2"
1 1/8"
16.95
Smooth section on handle allows vise to be
held in machine chucks or collets. Handle has
hole through entire length to accommodate
stock up to the full size capacity so that long
rods can be gripped close to the end. End of
handle is knurled and has a smaller diameter
than chuck which allows fast opening and
closing and rapid rotation between the thumb
and finger when filing or forming small work.
Both vises have heavy nickel plated finish.
Made in the USA.
CAT.# RANGE, ENGLISH RANGE, METRIC PRICE
ST240A
0 to .055"
0 to 1.4 mm
19.99
ST240C
.045 to .135" 1.2 to 3.4 mm 2
5.99
Holds small drills, burrs, wires, files, reamers
and other small tools, 0 to 1/4". Three jaw
hardened steel keyless chuck, sturdy plastic
handle.
CAT.#
CAPACITY
PRICE
GN93
.0 to 1/4" .0 to 6.3 mm
13.95
Use to hold small pins, rods, wire, drills, taps,
and other small tools. Nickel plated body
made of tubing, permits use of long wire or
rods. Each end has a double end collet that
may be reversed to desired size. 3 3/4” length,
5/16” diameter.
CAT.#
CAPACITY
PRICE
GN90
.0 to .125” .0 to 3.2 mm
14.95
Designed and built by an engraver and
knifemaker. In just seconds you can hold
knives securely for engraving and other
detail work with this wonderful vise. Special
chain-like linear jaws conform to unusual
and compound shapes with ease. Lined with
a special hard rubber ribbon, these jaws grip
securely without high clamping force.
The Knifemaker’s Contour Vise is totally
adjustable for a wide range of widths and
depths of knives. It mounts in any vise
including all known engraving blocks. If you
work on knives, get one…it’s a well-made
bargain.
CAT.#
DESCRIPTION
PRICE
PV622
Contour Vise
89.95
Great for holding small objects when polishing.
Spring action in handle keep jaws open.
1-1/4" wide serrated jaws open to 7/16".
Overall length is 3-3/4".
CAT.#
DESCRIPTION
PRICE
GN815
Hand Vise
33.45
Our 4-in-1 Mini Screwdriver has two double-
ended blades great for working with miniature
Slotted and Phillips fasteners. Blades: 1/16”
and 1/8” Slotted, #00 and #1 Phillips.
CAT.#
DESCRIPTION
PRICE
GN744
4-in-1 Mini Screwdriver
2.95
Wiha Torx Wrenches
Precision wing style torx wrenches, designed
for long life.
CAT.#
DESCRIPTION
PRICE
FX105
T5 Torx Wrench
4.95
FX106
T6 Torx Wrench
4.95
FX107
T7 Torx Wrench
4.95
FX108
T8 Torx Wrench
4.95
FX109
T9 Torx Wrench
4.95
FX110
T10 Torx Wrench
4.95
A tool you can’t do without. For inspection
or holding parts. Slide lock holds parts firmly.
CAT.# POINT STYLE LENGTH PRICE
GN401L
Serrated
5 3/4"
6.99
OD
ID
CAT.#
TUBING TUBING PRICE
SC702
1/4"
3/16"
8.95
SC802
5/16"
3/16"
9.95
Grace Screwdrivers
Surgical Tubing
Gunsmith Screwdrivers
Hex Keys & Torx Set
Kant Twist Clamp
Pin Vises
Adjustable Pin Vise
Double End Pin Vise
Knifemaker’s
Contour Vise
Fully
Adjustable!
Steel Hand Vise
4
-in-
1
Mini Screwdriver
Slide Lock Tweezers