95 / 116
PAGE 95
WARNING!
USING GLOVES, APRONS, LOOSE CLOTHING NEAR ROTATING EQUIPMENT CAN CAUSE EXTREME INJURY.
For use on shafts with right-hand
male threads 1/2-20. Spring-
loaded jaws turn chuck to open
and close no key needed. Capacity
0-1/4". Attach to our Bench
Mandrel.
CAT.#
DESCRIPTION
PRICE
BLC2
Keyless Chuck
12.95
MACHINERY
JANTZ SUPPLY
★
1-800-351-8900
★
WWW.KNIFEMAKING.COMWheel is held securely in place by centrifugal
force. Spiral thread allows wheel to spin up the
tapered shaft when motor is turned on. When
motor is turned off, wheel comes slowly off for
safe, quick change. Precision machined from
cold rolled steel bars, with rust proof plated
finish. Held securely on shaft with two socket
set screws.
FITS
THREAD
CAT.#
SHAFT
TYPE PRICE
BLSR4
1/2"
RIGHT
9.95
BLSL4
1/2"
LEFT
9.95
BLSR5
5/8"
RIGHT
9.95
BLSL5
5/8"
LEFT
9.95
Arbor secures to motor shaft with set screws.
Has two 1-1/2" dia. steel flange washers.
Standard arbor for wheels up to 1 1/4" thick.
Ex Long Arbor takes wheels up to 2" thick.
SHAFT WHEEL THREAD
CAT.#
TYPE DIAM.
HOLE TYPE PRICE
BLAS4
Standard 1/2”
1/2” RIGHT
9.95
BLAS5
Standard 5/8”
1/2” RIGHT
9.95
BLAL4
Standard 1/2”
1/2’
LEFT
9.95
BLAL5
Standard 5/8”
1/2”
LEFT
9.95
BLAL6
Standard 3/4"
1/2" LEFT
9.95
BLA6
Standard 3/4"
1/2" RIGHT
9.95
BLAL4L
Ex. Long 1/2"
1/2" LEFT
16.95
BLAL5L
Ex. Long 5/8"
1/2" LEFT
16.95
BLAS4L
Ex. Long 1/2"
1/2" RIGHT
16.95
BLAS5L
Ex. Long 5/8"
1/2" RIGHT
16.95
Use these mandrels to mount wheels for use
in drills or flex shaft machines.
FITS WHEEL
CAT.#
SHANK HOLE WIDTH PRICE
FOM22
1/4"
1/4"
5/8"
4.95
FOM24
1/4"
1/2"
3/8"
4.95
FOM34
3/8"
1/2"
1"
4.95
Ball Bearing double-end mandrel features
two high-quality precision grade die-cast ball
bearing pillow blocks. Will run wheels up to
1" thick. Use with flap wheels, wire brushes,
buffing and grinding wheels having a 1/2"
arbor hole. Our keyless chuck can be mounted
on the right hand end to allow use of various
accessories such as sanding drums, mounted
points, etc. Pulley diameter 2", shaft diameter
is 5/8" threaded 1/2"- 20 Right and left hand,
12" overall.
MADE IN THE USA.
CAT.#
DESCRIPTION
PRICE
BL4224
Bench Mandrel
52.95
Extra Long
Overall length is 6 1/4".
CAT.# DESCRIPTION WEIGHT PRICE
KZ142
1x42 Sander 32 lbs.
259.95
CAT.# DESCRIPTION WEIGHT PRICE
KZ348
2x48 Sander 21 lbs.
279.95
KZ448
2x48 Sander/Motor 48 lbs.
409.95
CAT.#
DESCRIPTION
PRICE
KZ572
2x72 Sander
549.95
KZ672
2x72 Sander/Motor
729.95
1/3 HP motor, 1PH, 1725 RPM. 4" contact wheel,
tilt table. Vertical sander. 1800 SFPM. Platen can
not be removed.
Actual shipping charges apply.
Use 1" x 42" belts.
With or without 1/2 HP motor, 1PH, 3450 RPM.
Each come with 5" contact wheel, tilt table and
removable platen. Full hinged guard for quick belt
change. Can be mounted vertical or horizontal.
KZ448 runs 3450 SFPM. KZ348 is belt driven
supplied pulley V-belt. Both use 2" x 48" sanding
belts.
Actual shipping charges apply.
With or without 1/2 HP motor, Kalamazoo sander
vertical or horizontal. 2" x 72" belt, tilt table, 8"
serrated contact wheel, removable platen.--
KZ572
is belt driven with supplied pulley V-belt.
WT 24 lbs. --
KZ672
is 3450 RPM. WT 80 lbs.
Both use 2" x 72" sanding belts.
Actual shipping
charges apply.
Ruggedly built to withstand the most
demanding workloads. The extended shafts
and slim motor frame provide extra wide
clearance for buffing and polishing. If you
need a lot of torque we recommend you
use either the BL332B with 8" wheels or
the BL407B with 10" wheels. 3 year limited
warranty. The BL111 and BL114 have an
overall shaft extension of 16 1/8". Each end
extends 2 5/8" The BL332B and BL333B have
an overall shaft extension of 27". Each end
extends 6 3/8". The BL407B has an overall
shaft extension of 30”. Each end extends 7
3/16".
Actual shipping charges apply.
SHAFT
CAT.# H.P.
RPM DIAMETER PRICE
BL114
1/4 1800
1/2"
262.95
BL111
1/3 3600
1/2"
262.95
BL332B
3/4 1800
3/4"
515.95
BL333B
3/4 3600
3/4"
515.95
BL407B
*
1
1800
7/8"
682.40
*
The BL407B is supplied with a switch, but no cord or
plug. All others are complete with cord, plug and switch.
PRICES SUBJECT TO CHANGE.
BLGA14
BLGA16
Baldor's Cast Metal Pedestal accommodates
buffers up to 1 1/2hp. Height is 32 7/8", base
is 15 1/4" wide x 14" deep, weighs 61 lbs.
The cabinet stand is fabricated steel and will
accommodate 6" - 10" buffers. 34 1/2" high,
weighs 54 lbs. Shelves for storage.
Actual
shipping charges apply.
CAT.#
DESCRIPTION
PRICE
BLGA14
Baldor Cabinet Stand
235.42
BLGA16
Baldor Pedestal
312.35
Washers for arbors and mandrels. Sold Each.
CAT.#
HOLE O.D.
WIDTH PRICE
BLFS10
3/8” 1 1/4” 3/16” 1.95
BLFS13
1/2” 1 5/8”
1/4” 1.95
BLFS165 5/8”
2”
5/16” 1.95
Replacement nuts for
sanding drums, arbors,
etc. Plated finish.
CAT.#
THREAD TYPE
PRICE
BLH12
1/2" - 20 Left Hand
1.95
BLH58
5/8" - 11 Left Hand
1.95
BLR12
1/2" - 20 Right Hand
1.95
BLR58
5/8" - 11 Right Hand
1.95
Tapered Buffing Spindles
Motor - Work Arbors
Wheel Mandrels
Bench Mandrel
Standard
Overall length 3 1/2".
1
x
42
Belt Sander
2
x
48
Belt Sanders
2
x
72
Belt Sanders
KZ
348
KZ
572
KZ
448
KZ
672
Buffers
Pedestal and Stand
Steel Flanged
Washers
Hex Nuts
Keyless Chuck