Previous Page  32 / 60 Next Page
Information
Show Menu
Previous Page 32 / 60 Next Page
Page Background

ROUND UP

Humidity probe for tough processes

Michell Instruments, represented in South Africa by

Instrotech

– a

Comtest Group company – has

on offer their new HygroSmart HS3

probe, designed to withstand the kind of harsh and demanding

conditions found in industrial processes. Unlike many ‘disposable’

probes that have a short life within harsh conditions before needing

to be replaced, the HygroSmart HS3 sensor has a polymer

tile to give long-term reliable measurements. In addition,

it also has an accuracy of 0,8% RH, making it among the

most accurate and reliable RH probes on the market, as

well as allowing for longer recalibration periods.

 This not only gives peace of mind to process operators,

but also provides a low life-time cost of ownership when

compared to the disposable probes.The HygroSmart HS3

consists of a solid, corrosion-resistant probe body with an

interchangeable sensor.When recalibration is due, the old

HygroSmart HS3 sensor is simply exchanged for a new,

freshly calibrated one.This simple procedure takes only a

few seconds to carry out with the probe itself remaining

installed. Replacing just the sensor, rather than the whole

probe, is not only quick and simple, it also saves users

money over the lifetime of the probe.

 In most industrial applications, RH probes have to

withstand vibration, exposure to water, occasional heavy

shocks and high levels of electrical interference.The HygroSmart HS3

body is designed to cope with all these environmental factors. As

well as the solid body, the probe also has a 10 bar pressure rating,

rfi/emc electrical noise approvals and IP67 ingress protection rating.

Enquiries:Tel. +27 (0)10 595 1831 or email

sales@instrotech.co.za

Reduce risk of electrical injury

DeltaT Alert is a wireless, self-contained tempera-

ture-monitoring sensor that attaches to an electrical

enclosure cover. The patented, DeltaT Alert unit is

simple to install and comprises two temperature

sensors one to monitor the electrical enclosure's

interior temperatures and the second tomonitor the

room's ambient temperature where the enclosure

is located.

DeltaTAlert sensors are then configured to collect

data on continuous basis, at preset time intervals.

The data is wirelessly transmitted for analysis and

trending and warns the operator of temperature

rises within their electrical enclosures, well before

more serious problems arise and provides an easier,

more effective way to prevent costly electrical dam-

age and system downtime.

Delta T Alert bridges the gap between your in-

frared scans by monitoring and reporting critical

temperatures within your electrical enclosures on

a timed basis and effectively tracks your electrical

system enclosure temperatures and sends data

for analysis and trending. If a critical issue arises,

immediate notification allows for an appropriate

corrective action, before costly damage occurs.

Enquiries:Tel. +27 (0) 11 608 1551 or

email

sales@randci.co.za

Radical aerial thermography

Optris, specialists in non-contact temperature measurement, has on

offer to the market, the newly developed Optris PI LightWeight – a

market innovation that allows for radiometric recordings of video

imagery from the air. The combination of a miniature lightweight

PC and a light version of the Optris PI thermal imager weighs only

380 g.The PI LightWeight is therefore ideally suited for maintenance

work and quality inspections of solar and wind power systems and

also for thermographic surveys of buildings.

Mounted on a UAV, the Optris PI Lightweight allows recording

of radiometric IR images and videos.The flight thermography sys-

tem is therefore eminently suitable for error detection and quality

inspections of solar farms and wind power systems.The innovative

combination of a lightweight mini PC and a thermal imaging camera

is also ideally suited for thermographic analyses of hard-to-reach

places like roofs of buildings (building thermography) and it is al-

ready in use in agriculture where fields are being inspected before

being mowed (presence detection).

Optris is a German manufacturer of non-contact temperature

measurement equipment.Their product range consists of portable

and stationary infrared thermometers and online infrared cameras

for thermographic real time analyses.

Enquiries:Tel. +27 (0) 10 595 1831 or email

sales@instrotech.co.za

TEMPERATURE MEASUREMENT

Electricity+Control

August ‘16

26