1236 / 1562
7/12
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
7
Hand Tools
Design:
Cutter head made of stainless steel, dropped forged and fully tempered. Cutting edges
additionally induction hardened (min. 59 HRC), with micro-serration. The particularly flat-shaped
cutter head enables the cutting of the most narrow radii.
Application:
For straight continuous cuts as well as figure cuts, in metal sheet up to 1.2 mm
and stainless steel sheet up to 1.0 mm.
Ideal tin snips, with lever transmission
Design:
Made of high-quality steel, dropped forged. Blades additionaly induction hardened
(min 54 HRC). The holder prevents the strip ends from springing up. Handle lacquer finish,
with spring and slip guard.
Application:
For package steel strips up to max. 0.6 mm and 25 mm strip width, easy insertion
of the flat bottom under the steel band.
Order
No.
Length
mm
7088
Left-hand cutting
Cutting length
mm
0225
225
16.15
25
(568)
Steel strip shears
Design:
Precision cast-iron cutter. Cutting edges induction hardened (min. 56 HRC). The holder
made of polymer material holds down the strip and prevents it from springing up when cutting,
Twice the leverage for reduced effort and better cutting performance. Ergonomic handles with
soft cushion insert and plastic coating.
Application:
For package steel strips up to max. 1 mm and 32 mm strip width, easy insertion
of the flat bottom part under the steel band.
Order
No.
Length
mm
7074
Cutting length
mm
0260
260
74.30
38
(565)
Steel strip shears
Design:
Blades made of stainless steel. Left-hand cutting. The lower cutting edge is serrated,
the upper cutting edge is smooth. With spring for automatic opening and locking bar.
Application:
For cutting paper, cardboard, fabric, sheet metal, leather, rope, etc.
Order
No.
Cutting edge
7087
7091
Length
mm
Cutting length mm
7087
7091
0190
straight
7.40
8.70
190
40
42
0191
angled
7.85
9.25
190
38
36
(568)
(565)
Combi shears
7087
7091
Design:
Blades made of stainless steel, lower cutting edge with wire guide, upper cutting edge
smooth, with wire stripping blade, spring for automatic opening and locking bar. Handles with
ergonomic plastic coating and soft fabric inserts.
Application:
For cutting all materials up to thin sheet metal made of copper and aluminium as
well as flower wire in the wire guide. For stripping cables 1.0 mm
2
and 1.5 mm
2
. Not for steel,
hardened or naturally hard materials.
Order
No.
Length
mm
7100
Cutting length
mm
0190
190
11.75
40
(568)
Universal shears
Order
No.
Length
mm
7086
Right-hand cutting
7086
Left-hand cutting
Cutting length
mm
0210
230
25.50
–
30
0211
230
–
25.50
30
(565)
(565)
7087 0190
7087 0191
7091 0190
7091 0191
Handles plastic-coated.
Handles with ergonomic 2-component-coating.
Steel strip shears/scissors
1236