1332 / 1562
8/24
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
8
Abrasives
Order No.
Aluminium
Steel
TC
INOX
Cast
Plastic FRP
wood
Stone
Paint
8763/8764
C
V
C
V
KF808
Design:
Resin-bonded aluminium oxide grain (A) on tear-proof, thick, vulcanised
fibre backing material uniform and slightly loose. Excellent grit friction, long life,
minimal pressure and good flexibility.
An active additive in the coating slows
disc-clogging during use on soft metals (aluminium, stainless steel, etc.).
In addition, the coating acts as a coolant during grinding.
With centre hole
(standard bore 22.23 mm) and cross slots.
Application:
Special product for hard machining, steel alloys and non-ferrous
metals with angle and disc grinders as well as abrasive heads on flexible shanks.
For all angle grinders with backing pads of max. 80 m/s peripheral speed.
Ideal for working with containers, cast parts, body parts etc.
Note:
Rubber backing pad see (Order no. 8250).
Pricing per 100 pieces
Order No.
0036
0050
0060
0080
0100
0120
PU
Grit
36
50
60
80
100
120
8763
∅ 115 mm
44.70
36.90
36.10
34.50
34.50
34.50
25
8764
∅ 125 mm
57.30
52.00
49.30
46.40
46.40
46.40
25
(836)
Fibre grinding disc, aluminium oxide, for stainless steel and aluminium work
Order No.
Aluminium
Steel
TC
INOX
Cast
Plastic FRP
wood
Stone
Paint
8765/8766
V
C
C
V
Design:
Resin-bonded zirconia alumina grain (ZA) on tear-proof, thick, vulcanised
fibre backing material, evenly and slightly loose. Excellent grit friction, long life,
minimal pressure and good flexibility.
Self-sharpening and cooled grinding,
thus optimum machining performance.
With centre hole (standard bore
22.23 mm) and cross slots.
Application:
Special product for working with steel alloys and non-ferrous metals
with angle and disc grinders as well as abrasive heads on flexible shanks. For all
angle grinders with backing pads of max. 80 m/s peripheral speed. Ideal for
working with containers, cast parts, body parts etc.
Note:
Rubber backing pad see (Order No. 8250).
Pricing per 100 pieces
Order No.
0024
0036
0050
0060
0080
0120
PU
Grit
24
36
50
60
80
120
8765
∅ 115 mm
72.50
64.60
50.90
43.20
39.30
39.30
25
8766
∅ 125 mm
80.50
71.70
56.60
47.80
43.50
43.50
25
(836)
Fibre grinding disc, aluminium oxide
Order No.
Aluminium
Steel
TC
INOX
Cast
Plastic FRP
wood
Stone
Paint
8651
C
C
C
C
XF850
Design:
Full resin-bonded,
self-sharpening ceramic grit (CER) with zirconia
alumina (ZA) admixture, with cooling properties due to grinding-activated
additive coating,
on robust and very flexible fabric, scattered evenly and
slightly loose. With excellent grit friction,
extra-long life,
low to medium
pressure and very good flexibility.
Oil, grease, wax, water and emulsion-
resistant.
With centre hole (standard bore 22.23 mm) and cross slots.
Application:
For tough and cooled grinding
of high-alloy steel, titanium and
nickel-based alloys. Thanks to its extreme hardness it is best suited for working
with very hard surfaces.
Grinding-activated additives make cool sanding
possible, thereby significantly increasing performance. This also ensures
extended service life and reduces discolouration of surfaces.
Suitable for
both dry working and working with cooling agents.
Note:
For rubber backing discs see (Order No. 8250).
Order No.
0036
0040
0060
0080
PU
Grit
36
40
60
80
8651
∅ 125 mm
126.00
107.00
84.10
76.50
50
(846)
Fibre grinding disc, ceramic grit with zirconia alumina admixture
Pricing per 100 pieces
m
m
m
Fibre grinding discs
1332