367 / 1562
2/121
Articles marked ◊ are not held in stock, procurement is effected at short notice.
2
Cutting Tools
Design:
Shaft in accordance with DIN 1835-B tempered, outer and inner dia. ground.
Concentricity tolerance: 0.01 mm.
Scope of supply:
With tightening screw and intermediate ring, without circular saw blade.
Application:
For the precise securing, clamping and seating of metal circular saw blades in
accordance with DIN 1837/1838 using Weldon shaft with a saw blade dia. of 20–100 mm.
Order No.
1020
1025
1032
1040
1050
1063
1080
1100
For saw blade
mm 20
25
32
40
50
63
80
100
2658
80.40
80.40
80.40
80.40
80.40
80.40
115.00
115.00
D3
mm 5
8
8
10
13
16
22
22
D1
mm 20
20
20
20
25
25
25
25
D2
mm 10
13
16
19.5
24.5
24.5
34
39.5
L1
mm 94
104
110
114
141
141
160
160
L2
mm 30
42
53
60
77
77
92
92
(396)
Slitting Saw Blade Holder
DIN
1835-B
Design:
Set of saw blade holders with tool carrier.
Shaft in accordance with DIN 1835-B quenched and tempered, outer and inner dia. ground.
Concentricity tolerance: 0.01 mm.
Scope of supply:
With tightening screw, intermediate ring in case, without circular saw blades.
Application:
For the precise securing, clamping and seating of metal circular saw blades in
accordance with DIN 1837/1838 using Weldon shaft with a saw blade dia. of 20–63 mm.
Order
No.
Contents of set dia.
mm
2658
1500
20; 25; 32; 40; 50; 63
503.00
(396)
Set of Slitting Saw Blade Holders
Design:
Made of special alloy, ground flat. For a perfect fit, knurled on the outer edge.
Application:
For reducing the bore of metal circular saw blades from
dia. 40 mm to dia. 32 mm.
Order
No.
Dimensions
mm
2675
Thickness
mm
0005
40/32
8.25
2.0
0010
40/32
8.25
2.5
0015
40/32
8.25
3.0
(243)
High Precision – Bore Reduction Ring for Slitting Saw Blades
H7
m
m
Slitting saw blade holders
367