Catalog FORMAT plus - EDE 2015 - 2017

369 / 1562

2/123
Articles marked ◊ are not held in stock, procurement is effected at short notice.
2
Cutting Tools
Design: Material no. 1.3343 (HSS-DMo5), bore H7, in accordance with DIN 1840, hollow-ground. The base
material is laser-cut with a bright surface finish. Hardened and repeatedly annealed to 63–65 HRC.
Order No.
Steels
up to
850
N/mm 2
Steels
up to
1000
N/mm2
Steels
up to
1400
N/mm2
Steels
up to
42 HRC
Steels
up to
52 HRC
Steels
up to
56 HRC
Steels
up to
60 HRC
Hard
machining
over
60 HRC
Stainless
and acid-
resistant
steels (INOX)
Ti steels,
Ti alloys,
special
steels
Cast iron
materials
Al,
AI and
Mg alloys
Copper,
brass,
bronze
2671 85 20
2673 85 20 20
2674 120 40 40
Order
No.
dia. x width x bore
mm
2671 2673 2674
TiN
Teeth and
tooth shape
Number NL/∅/circular pitch
mm
Tooth pitch T
mm
0001 225 x 2.0 x 32 60.30 86.00 – 120 HZ 2/8/45+4/9/50+2/12/64 6
0003 225 x 2.0 x 32 60.30 86.00 – 180 BW 2/8/45+4/9/50+2/12/64 4
0005 250 x 2.0 x 32 63.50 91.10 127.00 128 HZ 2/8/45+4/9/50+2/12/64 6
0007 250 x 2.0 x 32 63.50 91.10 127.00 200 BW 2/8/45+4/9/50+2/12/64 4
0009 275 x 2.0 x 32 74.80 113.00 133.00 144 HZ 2/8/45+4/9/50+2/12/64 6
0011 275 x 2.0 x 32 74.80 113.00 133.00 220 BW 2/8/45+4/9/50+2/12/64 4
0013 275 x 2.5 x 40 74.40 115.50 132.50 110 HZ 2/8/55+4/12/64 8
0015 275 x 2.5 x 40 74.40 115.50 132.50 144 HZ 2/8/55+4/12/64 6
0017 275 x 2.5 x 40 74.40 115.50 132.50 180 HZ 2/8/55+4/12/64 5
0019 275 x 2.5 x 40 74.40 115.50 132.50 220 BW 2/8/55+4/12/64 4
0021 300 x 2.5 x 32 101.00 137.50 170.00 120 HZ 2/8/45+4/9/50+2/12/64 8
0023 300 x 2.5 x 32 101.00 137.50 170.00 160 HZ 2/8/45+4/9/50+2/12/64 6
0025 300 x 2.5 x 32 101.00 137.50 170.00 240 BW 2/8/45+4/9/50+2/12/64 4
0027 300 x 2.5 x 40 101.00 137.50 170.00 120 HZ 2/8/55+4/12/64 8
0029 300 x 2.5 x 40 101.00 137.50 170.00 160 HZ 2/8/55+4/12/64 6
0031 300 x 2.5 x 40 101.00 137.50 170.00 240 BW 2/8/55+4/12/64 4
0033 315 x 2.5 x 32 119.50 153.50 203.00 120 HZ 2/8/45+4/9/50+2/12/64 8
0035 315 x 2.5 x 32 119.50 153.50 203.00 160 BW 2/8/45+4/9/50+2/12/64 6
0037 315 x 2.5 x 32 119.50 153.50 203.00 250 BW 2/8/45+4/9/50+2/12/64 4
0039 315 x 3.0 x 40 129.50 173.50 216.50 120 HZ 2/8/55+4/12/64 8
0041 315 x 3.0 x 40 129.50 173.50 216.50 160 HZ 2/8/55+4/12/64 6
0043 315 x 3.0 x 40 129.50 173.50 216.50 250 BW 2/8/55+4/12/64 4
0045 350 x 3.0 x 40 157.50 205.00 – 110 HZ 2/8/55+4/12/64 10
0047 350 x 3.0 x 40 157.50 205.00 – 140 HZ 2/8/55+4/12/64 8
0049 350 x 3.0 x 40 157.50 205.00 – 180 HZ 2/8/55+4/12/64 6
0051 400 x 3.5 x 50 254.00 304.50 – 100 HZ 4/15/80+4/15/85 12
0053 400 x 3.5 x 50 254.00 304.50 – 140 HZ 4/15/80+4/15/85 9
0055 400 x 3.5 x 50 254.00 304.50 – 180 HZ 4/15/80+4/15/85 7
0057 450 x 4.0 x 50 457.00 589.00 – 100 HZ 4/15/80+4/15/85 14
(243) (243) (243)
HSS Metal Slitting Saw Blade
HSS
DMo5
2671 High-performance "Base Cut", wear-resistant coating according to the PVD
process as protection against material pick-up, to improve tool life and use of
coolant.
Application: Can be used on manual, semi-automatic and fully automatic sawing
machines. For cutting construction steels, non-alloyed tool steel, tough and hard
and tough materials (V 2A, V 4A) with material strengths up to 850 N/mm2.
Universal use for steel and stainless steel.
2673 Very powerful "Eco", highly wear-resistant coating according to the PVD process
as protection against material pick-up, to improve tool life and use of coolant.
Application: Can be used on manual, semi-automatic and fully automatic sawing
machines. For cutting construction steels, non-alloyed tool steel, tough and hard
and tough materials (V 2A, V 4A) with material strengths up to 1000 N/mm2.
Universal use for steel and stainless steel.
2674 Highly wear-resistant TiN-coating. With significantly reduced friction coefficient
and greater temperature stability.
Application: Outstandingly for automatic sawing machines and for the use
of minimum quantity lubrication/minimum quantity cooling. The highly wear-
resistant coating and improved gliding properties make it the preferred choice
for permanent use/serial cutting. Permits higher cutting speeds and feeds while
increasing tool life at the same time.
TiN
TiN
HZ = Curved tooth with
roughing and finishing
teeth for all tooth
pitches over 4 mm.
Tooth shapes:
BW = Curved tooth
with alternately
bevelled up to 4 mm
tooth pitch.
Slitting Saw Blades
Not all items are available in every country.
369