655 / 1562
3/115
Articles marked ◊ are not held in stock, procurement is effected at short notice.
3
Clamping
Systems
Design: Protection class IP 67.
Precision Universal 3D probe for
installation into the milling spindle or the countersunk head; the
spindle axis is positioned precisely on the workpiece or device edges.
Any approach direction (X, Y, Z-axis). The dial gauge always deflects
in the same direction and indicates the distance between the spindle
axis and the workpiece edge. As soon as the display is set to zero,
the spindle axis is positioned without prolonged attempts; without
calculations, without sign problems, precisely on the edge of the
workpiece. This reduces the additional costs. increases productivity
and relieves employees. The probe tip is changed without requiring
a tool; recalibration of the probe is not necessary. The enlarged travel
path in combination with the tried and tested predetermined breaking
point provide additional safety. For maximum measuring accuracy,
all universal 3D probes are individually measured and aligned during
installation. For extremely easy handling, the Universal 3D probe is
available with an integrated steep taper adaptor (Order No. 3770
0010). The steep taper (DIN 69871, SK 40) and Universal 3D probe
form one unit.
Application:
For setting workpiece zero points and length
measurements on milling and eroding machines (insulated probe tip)
and for centring and taking the mean of bore holes and shafts.
Supplied:
3D probe and short probe tip ∅ 4 mm.
Note:
The new-generation probe tips also fit into the available
universal 3D probe.
Order
No.
Shaft ∅
3770
Ball tip ∅
mm
Display accuracy
mm
Housing ∅
mm
Length without clamping shaft
mm
0005
20 mm
276.00
4
0.01
65
113
0010
SK 40/DIN 69871
298.00
4
0.01
65
113
(392)
Universal 3D probe, IP 67
Design:
The digital 3D probe is a further development of the tried and
tested mechanical 3D probe. The spindle or countersunk head can be
positioned quickly and reliably on the reference edges. The start-up
process can be traced accurately on the digital dial gauge. The zero
setting is found immediately. The machine measuring system can be
zeroed without calculations, as the spindle axis stands directly on the
probed edge. Digit height of the LC display 8.5 mm, in this way the
values remain unambiguous and correctly readable from a distance,
even on large machining centres.
Function:
Switch-on and switch-off, mm/inch-conversion.
Application:
For setting workpiece zero points and length
measurements on milling and eroding machines (insulated probe tip)
and for centring and taking the mean of bore holes and shafts.
Supplied:
3D probe with battery and short probe tip ∅ 4 mm.
Note:
The new-generation probe tips also fit into the available
Universal 3D probe.
Order
No.
Shaft ∅
mm
3775
Ball tip ∅
mm
Display
accuracy
mm
Repeat
accuracy
mm
Measuring
accuracy
mm
Housing ∅
mm
Length without clamping shaft
mm
0005
20
490.00
4
0.001
0.001
0.005
65
113
(392)
Digital 3D probe, IP 64
IP 67
IP 64
3D probe
Not all items are available in every country.
655