837 / 1562
4/109
Spirit levels/precision levels
Design:
Made of silver-coloured anodised aluminium. With one circular horizontal and one
vertical bubble, two milled measuring faces, shock-absorbent end caps and strong holding
magnets. The illuminated display rotates automatically with overhead measurements.
Fast, electronic measurement of angles between 0° and 90°. The measurement value display
takes place between 0° and 1° with two decimal places, and between 1° and 90° with 1 decimal
place. Hold function (measurement value memory) for 9 values, can be displayed in degrees,
inches/feet or percent and with an acoustic signal on reaching the horizontal or vertical levels
or a 45° angle. Point laser for accurate transmission of heights and angles. Measuring accuracy
of bubble level indicators at least 0.5 mm/m for normal and reverse measurements. Accuracy
of the electronic measurement at least 0.2°. Supplied with 2 micro batteries AAA/LR03, 1.5 V,
in carrying case.
Application:
Suitable for horizontal and vertical normal, reverse and overhead measurements.
Also for measurement of gradients, inclinations and alignments and for inspecting surfaces for
evenness.
Note:
Replacement battery (Order No. 9041 0020,
Ç
9/10).
Order
No.
Length
cm
4732
Cross-section
mm
0300
30
65.80
60 x 33
0600
60
97.50
60 x 33
1200
120
155.10
60 x 33
(465)
Digital laser spirit level DigiLevel Pro
Design:
Frame made of special grey cast iron, with 3 prismatic bases and one flat measuring
face, precision ground. The longitudinal and transverse bubbles are made of special glass and
filled with ethyl ether. The longitudinal bubble is stored stress-free and can be easily adjusted to
0 position backlash-free without having to dismantle it using an adjusting screw. With insulati-
on handles and dust cover. Supplied in a wooden box.
Accuracy:
DIN 877 Class 1a
with extremely sensitive longitudinal
bubble level indicator
0.02 mm/m.
DIN 877 Class 1b
with highly sensitive longitudinal
bubble level indicator
0.1 mm/m.
DIN 877 Class 2
with normal-sensitivity longitudinal
bubble level indicator
0.4 mm/m.
Application:
For levelling horizontal and vertical
shafts and surfaces and for alignment work in a 90 ° angle.
Order No.
1150
1200
2150
2200
3150
3200
3250
Length
mm 150 x 150
200 x 200 150 x 150 200 x 200 150 x 150
200 x 200
250 x 250
4736
283.50
331.00
303.50
359.00
428.50
474.00
524.50
One stroke sensitivity
mm/m 0.5
0.5
0.1
0.1
0.02
0.02
0.02
Accuracy
2
2
1b
1b
1a
1a
1a
(471)
Precision frame line level
DIN
877
Design:
Made of special grey cast iron, with prismatic sole and precision ground measuring
faces. The longitudinal and transverse bubbles are made of special glass and filled with ethyl
ether. The longitudinal bubble is stored stress-free and can be easily adjusted to 0 position
backlash-free without having to dismantle it using an adjusting screw. With insulation handles
and dust cover. Supplied in a wooden box.
Accuracy:
DIN 877 Class 1a
with extremely sensitive
longitudinal bubble level indicator
0.02 mm/m.
DIN 877 Class 1b
with highly sensitive
longitudinal bubble level indicator
0.1 mm/m.
DIN 877 Class 2
with normal-sensitivity longitudinal bubble level indicator
0.4 mm/m.
Application:
For alignment of horizontal shafts and faces.
Order No.
1150
1200
1300
2150
2200
2300
3150
3200
3300
Length
mm 150
200
300
150
200
300
150
200
300
4735
191.00
211.50
244.50
229.00
272.50
317.50
211.50
232.00
276.50
One stroke sensitivity
mm/m 0.1
0.1
0.1
0.02
0.02
0.02
0.05
0.05
0.05
Accuracy
1b
1b
1b
1a
1a
1a
2
2
2
(471)
Precision machine line level
DIN
877
Articles marked ◊ are not held in stock, procurement is effected at short notice.
4
Measuring
Equipment
Not all items are available in every country.
837