841 / 1562
4/113
Concentricity gauges
Application:
Prism inserts are replaced at the tips in
the tailstocks.
Order
No.
Tip height
mm
4315
Prism support ∅
mm
1000
50/75
81.50
3–15
(410)
Prism insert pair
Bestell-
Nr.
Scheibenabstand
max.
mm
4315
Werkstück-∅
max.
mm
Scheiben-∅
mm
0401
400
2865,00
◊
250
120
(410)
Design:
Contact surface finely ground, evenness acc. to DIN 876-2.
With 2 sliding tailstocks. Left-hand tailstock with fixed tip; right-hand
tailstock with flexible tip, stroke approx. 10 mm. Tailstocks can be
locked via eccentric clamp. With T-groove and measuring stand.
With dial gauge adapter ∅ 8 mm H7 and fine adjustment. Supplied
in transport packaging.
Order
No.
Tip height
mm
4315
Tip width
mm
T-groove
width
mm
Base plate
mm
0200
50
560.00
200
10 350 x 110
0350
50
709.50
350
10 500 x 110
0275
75
639.50
200
10 350 x 110
0375
75
727.50
350
10 500 x 110
(410)
Concentricity gauge
DIN
876-2
Design:
With rotary collet chuck device.
Order
No.
Tip height
mm
4315
T-groove width
mm
1005
50
347.50
10
1010
75
386.00
10
(410)
Tailstock left
Design:
Concentricity gauge Without points, disc blocks can be moved
on the base plate. The roller block can be adjusted 30 mm in height
for diameter alignment. High accuracy due to backlash-free bearing-
supported rotating discs, concentricity 5 µm, bearing capacity maximum
50 kg. Supplied with measuring tripod, in transport packaging.
Note:
Supplied without dial gauge.
Dial gauges are found from
Ç
4/43.
Ord r
o
Disc
distance max.
Workpiece
∅ max.
Disc ∅
2865.00
◊
Concentricity gauge with disk blocks
Articles marked ◊ are not held in stock, procurement is effected at short notice.
4
Measuring
Equipment
Not all items are available in every country.
841