863 / 1562
4/135
Measuring and testing equipment
0060
0050
Order
No.
Measurement range
4910
Length
mm
0050
–50 °C to +800 °C
43.40
165
0055
–50 °C to +800 °C
43.40
165
0060
–50 °C to +400 °C
47.50
165
(465)
4910
Thermo Sensor Touch,
as surface probe for solid surfaces.
0060
m
4910
ThermoSensor Tip,
for inserting into soft, highly-viscous materials.
0055
4910
ThermoSensor Air,
protected by a metal sleeve (∅ 6.5 mm), for air and gas
temperatures.
0050
Design:
Temperature sensor with heat-resistant handle, accuracy class 2.
Note:
Temperature sensor only for ThermoMaster and ThermoSpot-Vision.
Temperature sensor
Order
No.
Measurement range
4914
0100
–40 °C to +600 °C
76.00
(465)
Design:
Housing with impact-protection rubber coating and illuminated LC display. Tempe-
rature measurement range from –40 °C to +600 °C, optic 8:1. Integrated laser for precise
targeting of the measuring point, laser class 2M / < 5 mW. The emissivity can be adjusted to
between 0.10 and 0.99. The measurement value display can be switched between °C and °F,
and the largest value can be displayed (max. function) and the last measurement value stored
temporarily (hold function). Supplied with E-block battery 6LR61, 9 V, in carrying bag.
Application:
For
surface temperature measurement
at points which are hard to access and
in dangerous areas, such as moving machine parts or electrical installations.
Note:
Replacement battery (Order No. 9041 0025,
Ç
9/10).
Infrared thermometer ThermoSpot Pro
Order
No.
Measurement range
4914
0200
–40 °C to +600 °C
176.50
(465)
Design:
Housing with impact-protection rubber coating and illuminated LC display. Tempe-
rature measurement range from –40 °C to +600 °C, optic 8:1. Integrated laser for precise
targeting of the measuring point, laser class 2M / < 5 mW. The emissivity can be adjusted to
between 0.10 and 0.99. The measurement value display can be switched between °C and °F,
whilst still showing the lowest, average or largest value (min./avg./max. function) and the last
measurement value stored temporarily (hold function). The integrated hygrometer determines
the relative air humidity and calculates the dewpoint temperature. Supplied with E-block battery
6LR61, 9 V, in carrying bag.
Application:
For
surface temperature measurement
at points which are hard to access and in
dangerous areas, such as moving machine parts or electrical installations, and for measurement
of the
ambient temperature
, the relative
air humidity
and the
dewpoint temperature.
In addition, the device allows the
localisation of heat bridges
and possible condensation
formation.
Note:
Replacement battery (Order No. 9041 0025,
Ç
9/10).
Infrared thermometer CondenseSpot Pro
Design:
The illuminated dot matrix display shows both graphic and numerical measurement
values. With 12 coloured LEDs which display the degree of moisture or dryness of the measured
material; in addition a warning signal sounds if materials are found to be wet. Menu system with
22 languages, 62 selectable material characteristic curves (56 types of wood and 6 types of
building material). If not used, the device will switch off after 2 minutes. Supplied with E-block
battery 6LR61, 9 V, in carrying bag.
Measurement range/accuracy:
cement screed: 0 % … 4.5 % / ± 0.5 %
anhydrite screed: 0 % … 3.1 % / ± 0.5 %
gypsum plaster: 0 % … 9 % / ± 0.5 %
aerated concrete: 0 % … 48 % / ± 1 %
concrete: 0 % … 5 % / ± 0.5 %
lime sand brick: 0 % … 10 % / ± 0.5 %
wood: 0 % … 60 % / ± 2 % (6 % … 30 %)
Application:
The material humidity is stated in % when the device is placed on the material
surface (non-destructive).
Note:
Replacement battery (Order No. 9041 0025,
Ç
9/10).
Order
No.
Operating temperature
°C
4927
Dimensions
mm
0005
0–40
176.50
75 x 150 x 32
(465)
Material moisture analyser MoistureMaster
4
Measuring
Equipment
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
863