868 / 1562
4/140
Measuring and testing equipment
Order
No.
Measurement range
4941
Reading
Hardness
0100
100 HD
130.00
1.0 HD
Shore D
(498)
Design:
With drag indicator, max. mode captures the peak value, point mode shows the stable
measured value. Supplied in a wooden box.
Application:
Measuring the Shore penetration depth: plastics, resin, Formica, epoxy, acrylic etc.
Recommended especially for internal comparison measurements, where standard calibration,
e.g. according to DIN 53505 is not possible.
Hardness tester Shore-Duometer
Order
No.
Stroke length
mm
4941
measuring face ∅
mm
0110
15
260.00
75
(498)
Design:
For reproducible hardness testing with base plate of glass. High measurement
accuracy due to increased hardness of the base plate.
Mechanical design allows precise measurement movements. Levelling device for precise
levelling of the base plate. Levelling test bench for inhomogeneous test objects.
Application:
Suitable for Shore hardness testing of plastics, leather, etc. The SAUTER HB
hardness tester is mounted in a hanging position. The test object is placed on the round testing
table right under the probe tip. By depressing the lever, the probe tip is pressed in a defined
manner into the test object.
Note:
The accuracy of the measurement result with this test is about 25 % higher than for a
hand measurement. Supplied without Shore-Duometer.
Lever test stand for Shore-Duometer
Order
No.
Measurement range
yield strength
4941
Readability (d) HL Internal data memory
1000
375–2639
1270.00
1
9
(498)
Design:
Rebound module is jerked by a spring against the test object. The speed reduction is
measured and converted into Leeb hardness values. Tests at any angle (360°) due to automatic
compensation. Mini statistics function displays the measured value, average value, the diffe-
rence between maximum and minimum value, date and time. Measuring value display: Rockwell
(B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa). Automatic
unit conversion, so that measurement result is automatically re-evaluated in all the cited hard-
ness units.
Function:
Accuracy: 1 % at 800 HLD (± 6 HLD)
thinnest measurable layer: 8 mm
minimum radius of curvature of the test object (concave/convex): 50 mm
Supplied:
Impact device (type D), infrared printer, hardness reference block, AC adapter and
3 micro batteries AAA/LR03, in plastic case.
Note:
Replacement battery (Order No. 9041 0020,
Ç
9/10).
Leeb hardness test device HMM
Order
No.
Design
4941
Application
1010
Rebound sensor
415.00
Short sensor for narrow and
flat measurement openings
1015
Attachment ring
270.00
For secure positioning
1020
Impact body
115.00
–
(498)
Accessories for Leeb hardness test device
4941 1010
4941 1015
4941 1020
m
m
m
m
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
868