918 / 1562
5/48
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
5
Hand Tools
Design:
Supplied in a practical storage box made of impact-resistant plastic with foam
inlay.
Application:
For the highest demands of assembly work in hard-to-access places in
electrics, especially where
ESD tools
must be used.
Note:
For ESD electrician's screwdrivers see
Ç
6/116.
Order
No.
Design
5366
Set contents
0015
8-piece
114.00
1 long-nose pliers, 115 mm
(Order No. 5362 0010)
1 side-cutting pliers, 115 mm
(Order No. 5368 0005)
1 slotted screwdriver, 2.5 mm
(Order No. 6369 0025)
1 slotted screwdriver, 3.0 mm
(Order No. 6369 0030)
1 slotted screwdriver, 3.5 mm
(Order No. 6369 0035)
1 slotted screwdriver, 4.0 mm
(Order No. 6369 0040)
1 Phillips screwdriver, PH 0
(Order No. 6371 0010)
1 Phillips screwdriver, PH 1
(Order No. 6371 0015)
(525)
ESD electrician's tool set
Design:
Made of special grade, special tool steel; forged; hardened and tempered in oil.
Polished head,
serrated grip zones with smooth tips, for the careful gripping of single
conductors. Inductively hardened precision blades. With
screwed hinge
for the utmost
precision and play-free operation. Prominent outer edge on the jaw for working with
in-wall sockets and deburring of holes.
Application:
For universal use in electrical installations
with 6 functions:
bending, de-flashing,
cable-cutting, wire-stripping, crimping of ferrules
(trapezoid pressing)
as well as for gripping
flat and round materials.
Order
No.
Length
mm
5372
5373
Copper/aluminium
cutting values ∅
mm
Copper/aluminium
cutting values
mm
2
Single conductor
stripping values
mm
2
Wire cross
section for ferrules
mm
2
0200
200
36.50
41.10
15
50
0.7–1.5 + 2.5
0.5–2.5
(525)
(525)
Electrical installation pliers
5372
Handles with multi-component plastic covers.
5373
Handles with multi-component plastic covers, with recessed grips and indented
lettering,
insulated up to 1000 V in line with IEC 60900, DIN EN 60900,
VDE 0682/Part 201.
Screwed hinge
Design:
Made of stainless steel, with opening spring. Handles with plastic covers.
Application:
For the single-handed cutting of copper and aluminium cables.
Note:
Not suitable for steel wire and hard-drawn copper conductors.
Order
No.
Cutting values ∅
mm
5374
Cutting values
mm
2
Length
mm
0168
4
11.10
10
168
(523)
Cable shears
Design: DIN ISO 5743.
Made of special tool steel; forged; hardened and tempered in oil.
Head chrome-plated, polished
and
offset for clear view
of the working area
,
with internal
opening spring, single locking lever and clamp protection. Hardened blades with precision
sharpening, easy single-handed cutting, smooth, clean and without squashing. Handles with
multi-component plastic covers.
Application:
For the single-handed cutting of copper and aluminium cables.
Note:
Not suitable for steel wire and hard-drawn copper conductors.
Order
No.
Cutting values ∅
mm
5390
Cutting values
mm
2
Length
mm
0181
12
28.10
50
180
0220
18
35.20
70
220
(512)
Cable shears, offset
5373
5372
m
Electrician's tool sets/installation pliers/cable shears
918