920 / 1562
5/50
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
5
Hand Tools
Design:
Handy, small shape. Made of steel, forged.
Polished head.
Blades with two sharpened
grooves for cutting thin or thick single- and two-core cables. Handles with multi-component
plastic covers,
insulated up to 1000 V according to IEC 60900, DIN EN 60900, VDE 0682/
Part 201.
Application:
For squash-free cutting of copper and aluminium cables.
Note:
Not suitable for steel wire, steel-reinforced cable, aluminium alloys and hard-drawn
copper conductors.
VDE cable shears KT 8
Design:
Blade head made of forged special tool steel (interchangeable), hardened and
tempered in oil.
Polished head.
With clamping protection and adjustable screwed hinge.
Lighter and cleaner cut thanks to the new blade shape, less effort required due to optimum
gear ratio. Arms made of high-strength aluminium oval pipe,
4 different arm length settings
between 400 and 600 mm. The
articulated joint has different settings
to allow for working
in narrow spaces and to optimise the lever arm in the case of fully pulled-out arms.
Handles with multi-component plastic covers.
Application:
For single- and multi-wire copper and aluminium cables.
Note:
Not suitable for steel wire, hard-drawn copper conductors or steel wire.
Order
No.
Cutting values ∅
mm
5394
Cutting values
mm
2
Length
mm
0560
38
197.00
280
550–700
(525)
Cable shears with telescopic arms
Design:
Made of chrome-vanadium electric steel, oil hardened and tempered. With hardened
blades, cuts smoothly and cleanly without squashing. With clamping protection and adjustable
screwed hinge.
Application:
For single- and multi-wire copper and aluminium cables.
Note:
Not suitable for steel wire or wire cable.
Cable shears
5392
5396
5392
Burnished head.
Low effort due to optimum leverage and special cutting
edge geometry. Arms made of high-strength aluminium pipe. Handles with
multi-component plastic covers.
5396
Polished head.
Favourable gear ratios due to toggle. Arms made of steel pipe.
Plastic-covered handles.
5397
Polished head.
Favourable gear ratios due to toggle. Arms made of steel pipe.
Handles with plastic coating,
insulated up to 1000 V, according to IEC 60900,
DIN EN 60900, VDE 0682/Part 201.
Order
No.
Cutting
values ∅
mm
5392
5396
5397
Cutting values
mm
2
Length
mm
0501
27
89.20
–
–
150
500
0600
27
–
153.50
182.50
150
600
(525)
(525)
(525)
5397
Order
No.
Cutting values ∅
mm
5386
Cutting values
mm
2
Length
mm
0165
8
35.00
16
165
(523)
Design:
Made of
stainless
surgical steel, air-hardened and tempered. Polished head. Hardened
blades with precision sharpening, easy single-handed cutting, cut smoothly and cleanly, without
squashing. Self-locking and adjustable screwed hinge with clamping protection. Handles
moulded with impact-resistant plastic,
insulated up to 1000 V, in line with IEC 60900,
DIN EN 60900, VDE 0682/Part 201.
Application:
For cutting single- and multi-wire copper and aluminium cables.
Note:
Not suitable for steel wire and hard-drawn copper conductors.
Order
No.
Cutting values ∅
mm
5389
Cutting values
mm
2
Length
mm
0230
16
39.10
50
230
(525)
VDE cable shears
Cable shears
920