Front Cover Story
Since 1985 Universal Tube & Rollform has been
committed to being the number one supplier of
used tube, pipe and rollform machinery in the
world. Its presence in this industry has always
been strong and honourable, working with
companies locally and all over the world, it says.
Its president, Ralph Girkins, has over 35 years
of experience in the tube and pipe industry.
The company takes pride in its knowledge and
ability to mix and match various machinery to fit
customer needs. New, used or reconditioned, it can help put it all together
to balance clients’ budgets and increase the value of customer spending.
It has one of the largest selections of used tube and pipe mills in the world.
Utilising over 125,000 square feet of warehouse space, it also stocks
rollformers, cut to length, slitting lines and more. It has the resources and
expertise to satisfy companies’ machinery needs.
Editor
Rory McBride
Features editor (USA)
Dorothy Fabian
Editorial assistant
Christian Bradley
Production
Lisa Wright
Sales & marketing
Catherine Sayers
English speaking sales
catherine@intras.co.ukGiuliana Benedetto
Vendite & Marketing (Italia)
giuliana@intras.co.ukHendrike Morriss
Verkauf & Marketing
(Deutschland, Osterreich, Schweiz)
hendrike@intras.co.ukLinda Li
中国大陆,台湾,
香港以及远东地区销售代表
linda@intras.co.ukJeroo Norman
Indian sales
jeroo@intras.co.ukAdvertising
Liz Hughes
co-ordinators
Andrea McIntosh
Subscriptions
Liz Hughes
Accounts manager
Julie Case
Publisher
Caroline Sullens
Founder
John C Hogg
Published by
Intras Ltd
46 Holly Walk, Leamington Spa
CV32 4HY, UK
Tel: +44 1926 334137
Fax: +44 1926 314755
Email:
tpt@intras.co.ukWebsite:
www.read-tpt.comIntras USA
Danbury Corporate Center
107 Mill Plain Road, Danbury
CT 06811, USA
Tel: +1 203 794 0444
Email:
doug@intras.co.ukTube & Pipe Technology
magazine is available in
print, online and CD-ROM. Go to
www.read-tpt.comfor more information.
Whenyouhave finishedwith this
magazineplease recycle it
TUBE&PIPE
TubeMills, TubeWelders,Benders, Cut-Offs,Deburring, End Formers,
Preheat/Anneal,Straighteners,Swagers.
ROLLFORMERS
Yoder, Tishken,Dahlstrom,
Bradbury, Lockformer.
SHEET& STRIP
Accumulators, Cut-Offs, Cut-To-Length,
Slitters, Flatteners, Levelers, Presses.
ENTRY EQUIPMENT
Uncoilers, Coil Cars,
Re-Coilers, ShearWelders.
JUST ARRIVED
12"WYMER LYDEN H.F. TubeMill
Line - Stock#2881,200KW THERMATOOL Solid StateH.F.Welder - Stock#2923,
3" x .160"ABBEY ETNA#3X-3.0 TubeMill Line - Stock#2933,12 Stand x2" x26"
B&KRollformer -#2940.
AFFORDABLEBUYINGOPTIONS
NEW7-1/2" (190mm) x
.240" (6mm) TubeMill Line - Stock#2747.
FOR
USEDANDRECONDITIONED
TUBE,PIPE&ROLLFORM
MACHINERY
The international magazine for the tube & pipe industries
VOL 26 NO 6
US$33
NOVEMBER2013
This publication and its full contents of layout, text, images, and graphics is
copyright protected. No part of this publication may be reproduced in any
form or by any means, electronic or mechanical including photocopying,
recording or any other storage or retrieval system without the publisher’s
written permission. The publisher, owners, agents, printers, editors and
contributors cannot be held responsible for and hereby exclude all liability
whatsoever for errors, omissions or the accuracy and claims printed or
inferred in the editorial or advertisements published in this, previous or
subsequent editions or for any damages, costs or losses caused thereby.
Tube & Pipe Technology
reserves the right to edit, reword and subedit
all editorial submissions in accordance with editorial policy.
Tube & Pipe
Technology
expressed graphically or by text is a registered name and
style trademark of Intras Ltd, UK. All matters relating to this disclaimer are
governed by the laws of England.
US Copies only:
Tube & Pipe Technology
(ISSN
No: 0953-2366, USPS No: 023-507) is published bi-
monthly by INTRAS Ltd and distributed in the USA
by SPP, 17B S Middlesex Ave, Monroe NJ 08831.
Periodicals postage paid at New Brunswick, NJ.
POSTMASTER: send address changes to
Tube &
Pipe Technology
, 17B S Middlesex Ave, Monroe
NJ 08831.
All rights reserved – © Intras Ltd
ISSN 0953-2366
The November Issue
Welcome to the latest issue of
Tube & Pipe Technology
magazine. This issue we have features on the FABTECH
show at McCormick Place, Chicago, and we take an in-depth
look at the latest developments in the area of welding
technology.
To complement our welding feature we also have a
fascinating article from the experts at Polysoude on the
specific methods and problems encountered while performing
narrow gap welding. As usual we also cover all of the very
latest industry news and information about the latest tube and
pipe machinery.
Between the time of writing and the January issue I will be
flying to São Paulo in Brazil and Chicago, USA. I am looking
forward to visiting both TuboTech and FABTECH and I am
sure I will see plenty of familiar faces. It is always good to
meet readers face to face and get your feedback about the
magazine. Make sure you drop by and pick up a copy of the
magazine if you are at either of these shows.
Next issue we begin our preparations for Tube Düsseldorf
with a preview. Please make sure you contact your usual
marketing representative at the magazine (phone number
and email addresses are to the right of this
column) as soon as possible in order to
ensure your inclusion in the issue. Please
submit your editorial for this issue and the
January features on straightening technology,
cutting, sawing and saw blades, coiling and
uncoiling technology to
rory@intras.co.uk.Enjoy the magazine.
Rory McBride – Editor