Blue Viper_Instruct_Page 1 Panel 4

3 / 8

VISIT FOR TIPS & TRICKS
ON USING YOUR BLUE VIPER
Pressure Switch
Battery
Compartment
Fill Cap
Handle
Tank
Spray Hood
Nozzle
Shaft
QUICK START GUIDE
1. INSERT BATTERIES (not included)
• Insert 4 AA batteries into the battery
compartment located on the underside of the
tank (see diagram).
• Test batteries by briefly pressing the Pressure
Switch and listen for the pump sound.
2. PRIME PUMP (before assembly)
• Fill the tank with plain water.
• Press the switch to activate the pump.
• When water is delivered out the tube end, priming is complete.
• Dump water out of tank.
3. ASSEMBLY
• Insert shaft of spray head unit into coupling of
power unit aligning shaft ends as shown.
• Firmly press two shaft ends together.
If needed, a drop of dishwash soap on the
O-rings may help.
• Twist clockwise to lock the connection
as shown.
4. FILL THE SPRAYER
• Remove the Fill Cap.
• Inspect tank for debris.
• Carefully pour preferred liquid herbicide solution into 16 oz tank.
• Replace Fill Cap and hand tighten.
Battery
Compartment
POWER UNIT
SPRAY HEAD UNIT