5 / 8
VISIT
WWW.BLUE-VIPER.COMFOR TIPS & TRICKS
ON USING YOUR BLUE VIPER
FOUR SPRAY PATTERNS
• SPOT SPRAYING
•
Precise placement of weed killer with no overspray. Reach between plants in mulch
beds and gardens.
•
Place the Blue Viper hood on the ground over the weed
that is to be killed. Press and release the pressure
switch. Move and repeat as needed. It takes only a
brief second for enough chemical to be applied in spot
spraying. Then allow a second for the check valve to
close to avoid dripping over desirable plants.
• CONTINUOUS EDGING
•
No stopping necessary with battery powered operation. Ideal for edging sidewalks,
mulch beds, fence lines, patios and around trees.
•
Place the Blue Viper hood 1”-2” from the
ground. Press and hold the pressure switch
while starting to walk. Follow the edge of
the area to be sprayed. Release switch
when finished.
• BROADCAST SPRAYING
•
Covers larger areas. Perfect for gravel drives, walking paths, mulch beds, etc.
•
Place the Blue Viper hood 6”-8” from the ground.
•
Press and hold the pressure switch. While walking
backwards, move the hood left to right, to evenly cover
the area. Release the switch when finished. Remember
with weed and grass killers, you do not need to soak the
ground for an effective kill.
• OVERHEAD SPRAYING
•
Spray hard to reach overhead locations. Perfect for spraying insecticides on roof
overhangs, fruit trees, and arbors.
•
Place the Blue Viper hood 6”- 8” from the targeted area.
Press and hold the pressure switch. Release the switch
when finished.