New Litrature 9-17-07.pub

4 / 40

4
• Rotor Masters
• Brake Drum Masters
• Crankshaft Masters
• Piston Masters
• Cam Shaft Masters
• Connecting Rod Masters
• Square and Hex Plug Gages
• Hole Location Gages
• Concentricity Gages
• Flush Pin Gages
• Template Gages
• Alignment Gages
• Design and Build Fixtures
• Wire EDM
• Rock Grinding
• Flat Lapping
• Grinding to .000050” (.0012mm)
• Jig Grinding
• Laser Marking
• ID and OD to 32 Inches
SPECIAL GAGING CAPABILITIES
THREAD GAGING
Diameters: Minimum #00 (.047”) (1.2mm) Maximum 14.250” (362mm)
Length: Maximum 30” (762mm) Depending On Tolerance
Threads Per Inch: 1/4 ~120 (.21mm) Depending On Diameter
Convolute: 32 TPI and coarser if larger than #6 (.138”) (3.5mm)
Chip/Dirt Groove: Larger than #8 (.164”) (4mm) 3 ~ 4 threads longer upon request
Depth Steps: Upon Request
Limitations: Flank Angles must be greater than 2 1/2 degrees.
Diameters: Minimum #0 (.060”) (1.5mm)
Maximum AGD 12.250” (311mm) Southern Style 14.250” (362mm)
Length: Maximum 6.5” (165mm) Depending On Tolerance
Threads Per Inch: 1/2 ~102 (.25mm) Depending On Diameter
Convolute: 20 TPI and coarser if larger than 3/8” (9.5mm)
Available for #10 (.190) (5mm) or Larger
Limitations: Flank Angles must be greater than 5 degrees.
AGD Rings
American Gage Design
Southern Style Rings
Thread Rings
GSGCAPABILITIES
Annular
>8.010”
Trilock
3/4” to 8.010”
Taperlock
#00 to 1 1/2”
Thread Plugs
Reversible
#00 to 3/4”
SPECIAL THREAD PROFILES
• British
• Buttress
• JIS
• DIN
• Conical
• Multi-Start
• BSP Full Form • Whitworth
• Asymmetric
• ACME
• API
• Long Form Certification • A2LA Certification
GAGE CERTIFICATION
CYLINDRICAL GAGING
• XXX, XX, X , Y, & Z
• Carbide Ring Gages
• Carbide Plug Gages
• Chrome Ring Gages
• Chrome Plug Gages
• Progressive Gages
• Master Discs
• Taper Gages
• Measuring Wires
• Segment Masters
• Titanium Plated Gages
• Taperlocks/Trilocks
Special material and plating options available (Chrome, Carbide and Tin coating etc.)