WCA September 2014

29 / 116

27
Wire & Cable ASIA – September/October 2014
Industrynews
FOR more than 65 years, Eder
Engineering has offered efficient
semi-automatic and fully automatic
machines for both reconditioning and
the production of ultrahard precision
drawing die tools made from tungsten
carbide, natural diamond and synthetic
PCD.
This is in addition to precision die tools
and technical assistance for all
advanced Eder equipment for the
up-to-date processing of die tools.
Eder has been continuously active in
China since 1978 and will again be
taking part in wire China from 24th to
27th September on stand W1C36.
Some highlights of processing dies will
include the ETC-1/HF, tungsten
carbide die grinding and polishing
equipment. This has a large work
range from 0.1 to 20mm diameter.
Particularly suitable for refurbishing of
PCD on multiwire drawing machines is
the ultrasonic USP twin, with two
workstations which have been
developed to work in a range between
0.05 to 8mm diameter. This can be
operated by one person while at the
same time doubling output.
Also on display will be the HGM-21 for
sizing and polishing the cylindrical
bearing of a mid to large quantity of
ND/PCD dies. This is an efficient and
versatile wire-type calibration machine
with a large work range of between
0.05mm and 10mm diameter.
Eder will be joined on the Austrian
pavilion by the AWCMA/VOEDKM
association, Ebner Industrieofenbau
(W1D45), Pengg (W1D49), MAG
(W1C30), Mali (W1D51), Medek &
Schörner (W1C32), Rosendahl
Nextrom (W1D43), Voestalpine Austria
Draht (W1D47) and WKO/Austria
Advantage (W1C34).
Eder Engineering GmbH – Austria
Website:
65 years of service from Eder
❍ The USP twin which Eder will present in
China