Workshop Solutions January 2018 SR (005)
Heating – Suspended Units
NOHASSLE WARRANTY
BEST PRICE PROMISE
AMBIRAD GAS RADIANT HEATERS
Burner
Suspended gas fired radiant tube heaters delivering exceptional efficiency and the potential to reduce energy costs. Suitable for showrooms, workshops, bodyshops and storage facilities. There are three vision ranges: 1. VSX range High efficiency with recuperative heat exchanger; available as a 'U' tube model 2. VS range Complete with stainless steel reflectors and endcaps, is available in 'U' tube, single linear and double linear models and can be mounted in linear or U tube herringbone configurations. 3. VSA range Complete with aluminised reflectors and endcaps, which is available in 'U' tube, single linear and double linear models and can be mounted in linear or 'U' tube herringbone configurations.
Control housing
Tubulators
Fresh air intake
Flueing
Heat Exchanger
Calcoat® tubes
Standard radiant heater
Vision (VSX)
Burner
Burner Burner
CALL FOR A QUOTE
Vision improves temperature distribution along the entire length of the heater.
Primary Heat Exchanger
Air Distribution
AMBIRAD ULTRA GAS HEATERS
Suspended gas fired unit heaters with clean aesthetic lines and configured for either room sealed or conventional flue applications. Suitable for showrooms, workshops, and bodyshops. Off-floor mounting provides an ideal solution where floor space is at a premium. The ULTRA exceeds European norms for efficiency and the lowest NOx and CO 2 emissions. The design of this gas fired unit heater combines high thermal efficiency, quality components and ease of maintenance for enhanced life expectancy and reduced life cycle costs. In conventional unit heaters, some of the heat is lost in the flue gases. In the AmbiRad ULTRA, these flue gases are led through a second heat exchanger which cools them down to a temperature below the dew point. This way, water vapour will condense and release its latent heat into the air flow.
Secondary Heat Exchanger
Traditional unit heater Higher roof space temperatures increase heat loss through roof
Controls
Electrical Components
Venter fan
Condensate Drain Shorter air throws reduce air distribution efficiency and require longer pre-heat times
Modulating Burner
Traditional unit heater Higher roof space temperatures increase heat loss through roof
ULTRA heater Reduced floor to ceiling temperature gradients
Longer air throws provide even heat distribution and reduce pre-heat times
Shorter air throws reduce air distribution efficiency and require longer pre-heat times
CALL FOR A QUOTE
ULTRA heater Reduced floor to ceiling temperature gradients
†Finance example typically based on a 5 year lease purchase agreement. Finance subject to status, full terms and conditions available on request. Other finance options available. All prices exclude VAT at 20%. Price, availability and specification may change without prior notice. Warranty subject to manufacturers terms and conditions of use. Errors and omissions excluded. Offers valid until 30th June 2018. Prices correct at time of going to press: January 2018.
59
autoclimate TM
Longer air throws provide even heat distribution and reduce pre-heat
Made with FlippingBook flipbook maker