34 / 62
EN 474-1 :2006+A3:2013 (E)
NS-EN 474-1 :2006+A3:2013
32
15) indication that the machine user has to determine whether special hazards exist in his application,
such as toxic gases, ground (underfoot) conditions that require special precautionary measures to
eliminate or reduce the hazard;
16) safety precautions to minimise chemical hazards during operation, maintenance and dismantling of
the machine;
17) the range of temperature in which the machine is intended to operate and be stored;
18) guidance for the selection of the ventilation filter element;
19) guidance on the need for FOPS and the selection of the level of FOPS where applicable;
20) operating instructions (e.g. use of intended access systems, for machines equipped with ROPS or
TOPS, use of restraint system, use of machines equipped with FOPS where the risk of falling object
occurs, proper use of attachment bracket and its locking and check procedure, use of heating and
ventilation system);
21) safety instructions for object handling application;
22) information on secure locking of stabilisers, outriggers;
23) safety instructions for operation in areas where special hazards exist (e.g. lines (gas, electricity) in
the ground; close to overhead electric lines; below ground in enclosed areas; in contaminated areas);
24) instructions regarding safety rules, pressure, inflation and checking of rubber tyres;
25) safety instructions for retrieving, towing and transportation (clear indication of attachment points for
retrieving and towing, respective attachment points for transportation);
26) safety instructions for lifting the machine, heavy attachment or parts of the machine;
27)
15)
safety instructions for maintenance, repair, assembling, dismantling and transportation;
®:1
28) maintenance operations requiring the engine running;
29) rules about reuse/replacement of hoses/hose fittings;
30) instructions whether or not the safety structure (e.g.: ROPS, TOPS, FOPS) can be repaired after
damage and the rules and conditions for repair;
:J.:::
31) recommendations for tools and accessories;
32) safety instructions for preservation and storage according to ISO 6749:1984;
33) provisions for limiting proximity hazards;
34) information that it is not allowed to transport or lift persons with an earth-moving machinery if the
machine is not designed and equipped for this purpose;
35) information and instructions to ensure that the whole-body vibration emission during machine use is
kept to a minimum and in order to avoid health damages of the operator;
the adjustment of the operator's seat to the operator's weight and height according to the seat
manufacturer's specifications;
the preservation of the operating terrain in good condition;