39 / 62
NS-EN 474-1 :2006+A3:2013
EN 474-1 :2006+A3:2013 (E)
Table A.1
(continued)
No.
Hazard
Relevant clauses of this
European Standard
20.3
Inadequate design of manual controls and their mode of operation 5.5, 5.6, 5.7
21
From handling the machine
(lack of stability)
5.11, 5.12, 5.15, 7.2
22
Due to the power source and to the transmission of power
22.1
Hazards from the engine and the batteries
5.3.1.3, 5.17.5, 5.17.6,
5.22.4
22.2
Hazards from transmission of power between machines
5.14.3
22.3
I
Hazards from retrieval, transportation, lifting and towing
5.15
23
From/to third persons
23.1
Unauthorised start-up/use
5.5.2
23.2
Drift of a part away from its stopping position
5.5.6, 5.11
23.3
Lack or inadequacy of visual or acoustic warning means
5.5.8, 5.9, 7.1, Annex C
5.3.1.5, 5.5.1' 5.5.8.2,
24
Insufficient instructions for the driver/operator
(operation 5.5.8.3, 5.9, 5.13.1.3, 5.15,
manual, signs, warnings, and markings)
Clause 7, 8.1.2, 8.2.3,
8.2.4, Annex C, 0.7, E.6
Additional hazards, hazardous situations and hazardous
events due to lifting
25
Mechanical hazards and hazardous events:
25.1
From load falls, collision, machine tipping caused by:
5.12, 5.15.4, Annex D, F.2
25.1.1
lack of stability
5.10, 5.11, 5.15.4, 7.1,
Annex 8
25.1.2
unexpected/unintended movement of loads
F.5
25.1.3
I
inadequate holding devices/accessories
5.12.1, 8.2
25.2
From insufficient mechanical strength of parts
5.12.2, E.2, E.3, E.5
25.3
From inadequate selection of chain, ropes, lifting and accessories E.2, E.4, E.5
and their inadequate integration into the machine
Additional hazards, hazardous situations and hazardous
events due to underground works
26
Mechanical hazards and hazardous events
due to:
5.23
26.1
Operator's station
5.3, 5.4, Annex D, F.2
26.2
Restricted movements of persons
F.2.1
26.3
Fire and explosion
F.3
26.4
Emission of dust, gases etc.
F.3
26.5
Warning signs
FA, F.5
37