341 / 601
Article 5: Development Standards
Section 5.9. Building Configuration and Design
5.9.8. Building and Design Standards for Multifamily Development
Morrisville, NC
June 23, 2017
Unified Development Ordinance
Page 5-79
(viii)
Variation in the size and placement of windows.
Figur
e 5.9.7.B.3.f(2):Architectural Variability
(Ord. No. 2016-001, 05/10/2016)
5.9.8.
Building and Design Standards for Multifamily Development
A.
Applicability
In addition to the exterior material and color standards in Sectio
n 5.9.4, Exterior Facade Materials and Colors for All Development,the standards in this section shall apply to the principal structures in a new
multifamily development except where exempted in accordance with Section
5.9.8.B, Exemptions.B.
Exemptions
Multifamily development submitted and determined complete in accordance with Section
2.4.3.F, Determination of Application Completeness,prior to May 11, 2016 or located within the following
zoning districts is exempted from these standards:
The Main Street (MS) district in Sectio
n 3.5.3;The Town Center Commercial (TCC) district in Sectio
n 3.5.4;The Transit-Oriented Development (TOD) district in Section
3.4.6.C.
Standards
Minimum Height
a.
Buildings and/or structured parking in a multifamily development subject to the standards in
this section shall comply with the minimum height requirements for the zoning district except
when all or a portion of the building and/or structured parking is located within 50 linear feet
of:
(1)
An existing single-family detached dwelling; or
(2)
A lot approved for development as a single-family detached dwelling.