EoW May 2011

39 / 108

EuroWire – May 2011 37
technology news
CANDOR Sweden AB
Tel: +46 11 21 75 00 Email:
Fax: +46 11 12 63 12 Website:
wire plating
plants
candor
can do wire
equipment
Electrolytic plating ◆
Candojet hot water cleaning ◆
Electrolytic & Ultrasonic ◆
degreasing
Welding wire cleaning and ◆
copper coating
Pickling & phosphating ◆
DAETWYLER Cables presented a newly
developed range of 19" high-density
ODFs (Optical Distribution Frames) for
use in FTTh backbone and distribution
networks at the FTTh Conference in
Milan, Italy.
With up to 6,624 LC connectors on 47 rack
units (U) the optical distribution frames
allow the highest port density on the
market to date.
Despite high packing densities the ODFs
offer clear patch cable management and
ample space for convenient assembly,
splicing and patching.
The standard version ODFs are supplied
as a 19" rack of 42U and 47U at heights of
2,000 and 2,200mm, respectively, both of
them 1,200mm wide and 800mm deep.
In the 42u standard model up to 2,880
optical fibres, and in the back-to-back
version as many as 5,760 fibres, can be
connected to LC ports. The 47U model has
space for 3,312 and 6,624 LC connectors.
Daetwyler Cables can also supply the
ODFs in other dimensions, for example in
a depth of 400 or 600mm, or in individual
heights.
The ODFs provide a sophisticated patch
cable management system which
allows the easy vertical and horizontal
organisation of patch cables and
adequate space for routing and storing
surplus lengths.
In addition to storage space for spare
conductors they have an integrated cable
splitter box which can also be mounted in
the floor cavity, on the roof or on the side
wall as required, semi-circular and circular
bend radius control devices on all fibre
guideways to prevent excessively tight
bend radii, and splice panels preloaded
with pigtails.
The basic equipment also includes top
and bottom cable entries, an earth rail
on the front, pre-assembled levelling feet
and variably mountable depth profiles.
Daetwyler Cables – Switzerland
Fax: +41 41 875 1986
Email:
Website:
Sylvin Technologies has received NSF International approval on a newly developed
flexible vinyl compound.
The compound has been specifically approved for compliance to NSF/ANSI Standard
51 which regulates what materials are suitable for use in food equipment products. The
compound, Sylvin 2942-75 is approved for food zone – non food contact applications.
Sylvin 2942-75 is a 75 Shore A profile extrusion grade compound that incorporates
ingredients sanctioned for use by the FDA.
Typical applications for this product would be commercial or residential refrigeration
and freezer gaskets.
NSF International certifies products and writes standards for food, water and consumer
goods.
Sylvin Technologies – USA Fax : +1 717 336 0547
Email: Website:
New range on offer
▲ Part of the new range from Daetwyler
Sylvin develops NSF 51 approved compound