news
Wire & Cable ASIA – September/October 2009
60
Cabmach, a Mario Frigerio SpA
company, has recently designed,
fabricated and commissioned a
double twist buncher for 1600 DIN
reels.
The machine has been designed to
work at different linear speeds and to
minimise installation and maintenance
costs.
Working with copper, the buncher
can be used for flexible strands up to
a maximum cross section of 240mm
2
(500mcm) or for unilay round strands
of 7 to 19 wires, compressed or
compacted, up to a maximum cross
section of 120mm
2
(250mcm).
Working with aluminium, the buncher
can be used for unilay round strands
of 7 to 19 wires, compressed or com-
pacted, up to a maximum cross
section of 150mm
2
(300mcm).
Technical developments that make
the DTR 160 competitive include:
A single bow system
•
New slip rings eliminate almost
•
100% of maintenance because
contact with the slip ring is by
optical
fibre
cables,
not
traditional carbon brushes
High-speed power transfer,
•
auxiliaries and data transmission
signals up to 12 Mb/s
Capstan, take-up and traverse
•
inverters are positioned on the
cradles
and
mechanically
protected
The buncher can be supplied with
accessories including a tensioning
unit, rotating pre-twister, rotating
motorised die holder and payoff
systems.
Mario Frigerio – Italy
Fax
: +39 0341 368385
:
info@mariofrigerio.itWebsite
:
www.mariofrigerio.itDouble twist
stranding
machine
New technology in
every issue
DTR 160 buncher from Cabmach
m
m