PRODUCT News
50
MODERN MINING
July 2016
Joy Global (Africa) (Pty) Ltd, A BEE Level 3 Contributor Wadeville, Johannesburg, South Africa Tel: +27 11 872 4000 or info@joyglobal.com JoyGlobal.com Joy Global, Joy, P&H and “Solving minings toughest challenges” are trademarks of Joy Global Inc. or one of its af liates. © 2016 Joy Global Inc. or one of its af liates. Mining is here to stay. But that doesn’t mean it has to stand still. Joy Global’s proven solutions and worldwide partnerships are helping customers achieve record-setting production levels and solving mining’s toughest challenges .US-based Martin Engineering has intro-
duced a secondary cleaning system that
removes nearly all of the carryback left on
a conveyor belt, including adhesive materi-
als and fines lodged in surface divots and
valleys.
The Martin® Washbox™ cleaning sys-
tem combines water spray and secondary
cleaning blades in an enclosed and self-
contained unit, draining residue safely
away from the work area. Operators who
Washbox belt cleaner removes difficult carryback
have installed the system are reported to
have drastically reduced dust and spill-
age from carryback, leading to a safer
workplace and longer belt life with con-
siderably less downtime.
“We design systems to eliminate nearly
all carryback issues faced by every indus-
try we serve,” said Dan Marshall, Product
Engineer at Martin Engineering. “After
extensive before and after testing, we
developed the washbox to complement
our standard products in some appli-
cations to further improve the life of
the belts, idlers, pulleys and clean-
ing blades.”
Available in two configura-
tions, a Dual Cleaner System and
a Single Cleaner System, the units
are mounted on the conveyor frame
directly after the return idler to ensure
belt alignment throughout the clean-
ing process and to allow proper time for
moisture evaporation on the return trip.
Passing through a powder-coated steel
box with top rollers, the belt is gently
The Martin®
Washbox cleaning
system removes conveyor belt carryback, includ-
ing sticky materials and fines.
washed by spray bars equipped with 10
to 30 nozzles delivering 0,34 to 4,14 bar
of pressure, using 20 to 204 litres/min of
potable or non-potable water.
The belt is then scraped clean by a
polyurethane blade and/or a urethane
squeegee blade, set on a tensioner for a
tight and consistent blade-to-belt seal.
Residue drains safely through an outlet
funnel below the box, which can lead to
a disposal unit or a settling pond/vessel
for introduction of material back into the
process.
Built for heavy to medium duty appli-
cations, the Dual Cleaner System is
equipped with three rollers, four spray
bars, two Martin® inspection doors and
two polyurethane secondary cleaners.
Recommended for use behind a primary
pre-cleaner on the face of the head pulley,
the colour-coded, high-performance ure-
thane secondary cleaners can be specified
for acidic or high-temperature materials.
The cleaner system can be speci-
fied from 762 to 1 524 mm in length and
1 129 to 1 350 mm in height, and fits on
most conveyor frames by adding approxi-
mately 432 mm to belt widths of 457 to
2 133,6 mm.
The Single Cleaner System houses a
roller, a secondary blade and a spray bar,
which are accessed by an inspection door
housed on either side of the enclosure.
Intended for tight-fitting spaces on light
to medium duty applications, the compact
unit is 381 mm long and can be specified
from 864 to 1 072 mm in height. The total
width of the unit can be determined by
adding 432 mm to the belt width of 457
to 1 219 mm.
Martin Engineering, tel (+27 13) 656-5135,
website:
www.martin-eng.co.zaNorth Safety teams up with UK-based Brady
With a geographical footprint spanning
100 countries, UK-based safety product
manufacturer Brady is in the process of
expanding its reach in Africa by teaming
up with North Safety – a well-established
regional distributor.
For more than a century, Brady has been
recognised as a specialist in the manufac-
ture of lock-out and tag-out systems, safety
labels, printers and scanners, safety soft-
ware, and spill control and containment kits.
Brady’s Business Development Manager
for South Africa and Sub-Saharan Africa,
Paulo Morais Neves, says the company
selected North as a regional distributor in
late-2014, due to its proven track record and
excellent reputation in the industry.
North’s Johannesburg and Durban
branches currently stock the full range of
Brady products. “We are currently negotiat-
ing minimum stock orders and levels for a
number of products in all North branches.
North and Brady are a good match, as both
companies uphold the same values, and
there is a mutual understanding as to how
each operates,”Morais Neves adds.
North Safety Products Africa,
website:
www.northsafety.co.za




