Previous Page  16 / 84 Next Page
Information
Show Menu
Previous Page 16 / 84 Next Page
Page Background

Latest News

Sensirion and Digi-Key Electronics announce worldwide

distribution agreement

New 3D printer unlocks ‘mind-blowing’ possibilities with electronics

manufacturing

Sensirion and Digi-Key are pleased to announce a

worldwide distribution agreement. Digi-Key is now

franchised to sell the wide range of sensors developed

with Sensirion’s patented CMOSens

®

Technology, which

enables the sensor component to be combined with the

signal processing circuitry on a tiny CMOS silicon chip.

The resulting sensor chips enable precise and reliable

sensing of relative humidity, temperature, or mass flow,

attaining the highest performance combined with cost

effectiveness. Sensirion’s many years of experience, hard-

won expertise and strong innovative drive have made it

the pioneer in sensors. Sensirion products available from

Digi-Key Electronics include Sensrion’s SHTxx and STSxx

digital relative humidity and temperature sensors, LG01

flow switch and bubble detectors for liquids, SDPx series of

high-performance differential pressure sensors and SFMx

series of gas flow meters. All Sensirion product families

have a variety of plug-and-play evaluation kits that support

data logging capabilities.

Installation of a highly advanced 3D

printer for electronics at Lawrence

Livermore

National

Laboratory

has opened the door for creating

miniature circuits on surfaces and

substances that could never be used

before.

The Optomec Aerosol Jet 500 system,

which became operational in January,

is capable of printing circuits with

a broad range of nanomaterials,

allowing engineers to manufacture

conductors, semiconductors and

microcircuits with an intricacy and

flexibility not possible with the Lab’s

previous technology.

Perhaps equally important, the 260 square-foot Optomec

system can potentially replace an entire 2,700 square-

foot electronics prototyping facility, which required a high

volume of hazardous chemicals to operate.

Previously, the smallest components created in the facility

„We are very excited to partner globally with Digi-Key to

leverage their exceptional reputation with the engineering

community and strong marketing presence. Digi-Key will

provide Sensirion customers more options for service and

support from design, to prototype and into production.

Digi-Key is an integral part of Sensirion growth strategy

and we look forward to strengthening the partnership and

growing our mutual sales.” says David Kenneth, General

Manager, North America, Sensirion.

“We are grateful for the opportunity to distribute Sensirion’s

innovative and comprehensive sensor solutions to design

engineers worldwide. Our customers will benefit from the

experience and knowledge that Sensirion offers in many

different application markets including IoT, automotive,

industrial, medical, and more. Our partnership will allow

engineers to get their designs and products to market

faster.” says Tom Busher, Vice President, Global I P & E,

Digi-Key.

were limited to 50-100 microns. The

Optomec machine can print at 10 microns

and also is not limited to copper or metallic

inks. It’s capable of utilizing a number of

conductive and nonmetallic materials,

even proteins, and printing on surfaces

such as glass, plastic or kapton, a thin

heat-resistant polymer. It also can print at

any angle in three dimensions, meaning

engineers can experiment with 3D-printed

antennas, flexible circuits, components for

robots and pressure and medical sensors.

“When we use it, we can print at different

angles and conform it the way we want,”

said Dale Kurita, a senior electronics

technologist. “There’s just unlimited

capabilities in the future. This opens up a whole new door

for people to look at electronics differently.”

Electronics technologist Julian Larregui, who is figuring

out how to use the software, said he was amazed by the

printer’s potential.

Gabriele Manganaro, an Analog Devices,

Inc. engineering director

16 l New-Tech Magazine Europe