26 / 124
24 MUTI-USE ARBORS
AD-A-UNIT ARBOR SYSTEM
For the shop that needs an
extra arbor for those many
special jobs, this versatile
series can fill the bill
•
You can buy the heavy duty 8" Husky
Arbor alone as a replacement or addition
to your shop, or—
•
You can buy the arbor with a heavy duty,
heavy molded plastic – one piece hood
and pan for use with your own motor for
power or—
•
You can buy the unit complete with
arbor, hood and pan, and
1
⁄
3
HP 115V
60 Hz motor with a baseboard.
•
Also available is the complete AD-A-UNIT-MB
model with a 220V 50 Hz motor for export.
•
A
1
⁄
2
HP variable speed model is available.
Call us with your needs.
The complete units are ideal for use in industrial shop
set ups and for community center and club workshops.
Excellent for multiple stations.
You can mount a wheel or expanding drum on each
end of the shaft. Both ends have a
1
⁄
2
" step for mounting
laps. The right hand will also accept
1
⁄
4
" - 20 screw
back discs. You can set up the unit as either a stone or
metal finishing unit.Attach our special Galaxy Carving
Wheels and you have a machine for carving stone.
You can use expanding drums with belts, a variety of
grinding and polishing wheels such as our diamond
Galaxy and NovaWheels, and various buffing wheels.
The 8" arbor is heavy duty, cast aluminum with a split
housing so just the removal of four screws allows
you to change the belt or remove the shaft for bearing
replacement. Arbor shaft is
3
⁄
4
" stainless steel with
overall length of 18". Cushion mounted bearings and
3-step pulley.
The hood and pan are now a single unit molded from
heavy duty plastic with a drain hose connector molded
in place. An overhead water manifold with two valves
for providing coolant (water) to wheels mounted on
arbor shaft.
SHOWNABOVE: Ad-A-Unit with 8" Husky arbor &
one piece molded plastic hood & pan.
CAUTION: Use Safety Goggles to protect your
eyes when using this machine.
AD-A-UNIT-MB: 8" Husky arbor with belt, 3-step
pulley, hood, pan,
1
⁄
3
HP 115V motor and laminated
baseboard. 20" W x 26"L.
630-28-2200.. ..........Shp Wt. 62 lbs. ..........890.00
AD-A-UNIT-MB: EXPORT MODEL same as
above but with 220V 50 Hz motor.
630-28-2200X.. .......Shp Wt. 62 lbs. ..........965.00
AD-A-UNIT: WITH VARIABLE SPEED
CONTROL.
1
⁄
2
HP
115V - Export
1
⁄
2
HP 220V .
630-28-2200V. ........Shp Wt. 65 lbs. ........1930.00
630-28-2200VX EXPORT...Shp Wt. 65 lbs....2035.00
CRATING FEE: Variable speed units only.
630-28C......................................................120.00