27
Turn your hang-up style mo-
tor into a bench top model with
the cast iron base and yoke
assembly. It includes all mount-
ing screws. Fits series R, S, and SR
motors.
BASE AND
YOKE
ASSEMBLY
103-UA10451...... 7 lbs......... 49.00
FOREDOMACCESSORIES
# 30
# 30
Foredom's most popular handpiece features a geared 3-jaw #0
chuck that takes any size shank accessory shank or drill bit up to
5
⁄
32
" (4mm). Comes with 103-CKH-1 chuck key with molded plas-
tic handle. Various bench top tools are available to work with the
versatile # 30, including Foredom’s drill press and handpiece holder
(page 30). 5
3
⁄
16
" long, 1" dia, weight, 5.85 oz.
103-HP30....................Shp Wt 10 oz...................................... 68.00
# 44T
# 44T
Collet-type chuck handpiece accommodates accessories
with shank sizes up to
1
⁄
4
" in diameter. Comes with three collets
,
3
⁄
32
" (2.35mm),
1
⁄
8
"(3.18mm) and
1
⁄
4
" (6.4mm), and pin and chuck
wrench. Other fractional andmetric collets are available in Collet Set
440 (page 30). Can also be used in Foredom’s handpiece holder and
drill presses. (page 30). 5
5
⁄
8
" long, 1" dia. (center)
3
⁄
4
"dia, (taper),
weight 5.85 oz.
103-HP44....................Shp wt 9 oz......................................... 60.00
FOREDOM
®
INTERCHANGEABLE HANDPIECES
SPEED CONTROLS FOR
1
⁄
6
HP
SERIES SR MOTORS
General purpose handpieces # 30, 44T, 28 and 20 have Foredom’s Quick Disconnect feature that makes it fast and
easy to interchange handpieces or to attach and remove them. Handpieces # 20 features Foredom’s Quick Change
Bur Release that allows you to insert and remove burs without the use of a chuck key or pin and wrench. All hand-
pieces have pre-lubricated ball bearings that require no additional lubrication and are suitable for continuous use.
NOTE: Burs shown are not included.
# 28
Collet-type chuck handpiece with a slender, comfortable design
and tapered grip. Comes with
3
⁄
32
" (2.35mm) and
1
⁄
8
"(3.18mm) col-
lets, and pin and chuck wrench. Other fractional and metric collets
are available in collet set 600 (page 30). 5
1
⁄
4
" long,
3
⁄
4
" dia. (center)
1
⁄
2
"dia. (taper), weight 3 oz.
103-HP28....................Shp wt 5 oz......................................... 60.00
# 20
Has molded plastic front grip with tapered sides
for easy and close handling. Comes with Lever Action
for quick and easy insertion and change of accessories.
Accommodates
3
⁄
32
" Shank only. To insert an accessory, rotate
lever 90° away from handpiece body, insert accessory, and
move lever forward or back 90° into locked position. 5
5
⁄
8
"
long, 1
1
⁄
8
" dia. (center)
3
⁄
8
" dia. (front taper), weight 4 oz.
103-HP20..................Shp wt 5 oz.................................. 89.00
The reliable FCT is Foredom's most popular foot operated speed control.
It features solid state circuitry in a heavy duty plastic housing with an
extra wide footprint, low profile, and non-skid pads on the bottom for
ease of use. It provides smooth control throughout the entire speed range.
CSA listed. 7" long, 4
1
⁄
2
" wide, 2
5
⁄
8
" high.
103-FCT-1 (115V)............Shp Wt 2 lbs......................................... 35.00
103-FCT-2CE (230V).......Shp Wt 2 lbs......................................... 70.00
The SCT offers the same electronics and smooth control as the FCT but
in a much heavier, cast iron housing. The bottom surface of the SCT is
covered with non-skid material. The added weight of the metal housing
eliminates any unexpected movement of the control along the floor. CSA
listed. 6
3
⁄
4
" long, 4 " wide, 2
5
⁄
8
" high. Not available for use with SR CE
machines.
103-SCT-1 (115V)..............Shp Wt 6 lbs....................................... 69.00
# 28
# 20
FCT-1
SCT-1