GE Aftermarket Catalog

25 / 202

Components: Parts1
Aftermarket Catalog 1-13
Prices and data subject
to change without notice
Molded Case Circuit Breakers
Power Management System Accessories
Spectra® RMS Circuit Breakers with MicroVersaTrip® Plus and MicroVersaTrip® PM Trip Units
All Devices UL Listed for Factory or Field Installation (UL File No. E-57253)
Distribution Cable Harness3
The Distribution Cable Harness is a modular connector used to carry electronic signals
and/or control power between Spectra® RMS Molded Case Circuit Breakers with
MicroVersaTrip® Plus or MicroVersaTrip® PM Trip Units and Distribution Cable accessories.
The harnesses come in three lengths.
List Price
Description Harness Length Product Number GO-135PM
Distribution Cable Harness 11 inches SDCHA11 $70.00
Distribution Cable Harness 30 inches SDCHA30 $80.00
Distribution Cable Harness 60 inches SDCHA60 $100.00
3Cannot be connected together. Use 30 inch Distribution Cable Extension (SDCEA30) to extend.
Distribution Cable Extension
The Distribution Cable Extension is used to provide modular expansion of the Distribution
Cable System.
List Price
Description Harness Length Product Number GO-135PM
Distribution Cable Extension 30 inches SDCEA30 $80.00
Distribution Cable Terminal Block
The Distribution Cable Terminal Block is a modular attachment primarily used to provide
an alternate means of input to Spectra® RMS Molded Case Circuit Breakers with
MicroVersaTrip® Plus or MicroVersaTrip® PM Trip Units. The Terminal Block plugs into the
breaker distribution cable receptacle allowing the direct connection of breaker signals
via screw terminals. This allows point-to-point wiring of breakers instead of using the
Distribution Cable System.
List Price
Description Product Number GO-135PM
Distribution Cable Terminal Block SDCTBA11 $110.00
Power Supply Assembly
The Power Supply Assembly is used to provide +24 Vdc Control Power to Spectra® RMS
Molded Case Circuit Breakers with MicroVersaTrip® Plus or MicroVersaTrip® PM trip systems
via the Distribution Cable System. The assembly requires a minimum input voltage of 85
Vac to operate properly (the maximum voltage rating is 240 Vac). Supplemental +24 Vdc
input terminals are provided for backup control power applications. The input must be
fused with 1/2 ampere class CC fuses (not included). Not suitable for 400 Hz.
List Price
Description Voltage Rating Product Number GO-135PM
The Power Supply Assembly is rated 24 watts 85 - 240 Vac SPSAA $1000.00
(+24 Vdc @ 1.0 ampere) and has the maximum
capacity to power a Distribution Cable System
consisting of 20 breakers and has a maximum
system cable length of 40 feet.
Distribution Cable Extension
Distribution Cable Terminal Block
Power Supply Assembly
Required Accessories
Type Accessories
Standard –
Ground Fault Option with 3-phase, 4-wire Neutral Current Sensor and Terminal Block
MicroVersaTrip® Plus Trip Unit or 1-phase, 3-wire service or Neutral Current Sensor and Junction Box
Control Power Option Power Supply Plate or Voltage Module1 or Power Supply Assembly 2
Power Supply Plate and Voltage Conditioner Plate or Voltage Module1
Standard or with Protective Relaying or Power Supply Assembly 2 and Voltage Conditioner Assembly 2
MicroVersaTrip® PM Trip Unit Junction Box, Cable Harness and Auxiliary Switch
Ground Fault Option with 3-phase, 4-wire Neutral Current Sensor
or 1-phase, 3-wire service
1For installation into GE Spectra® Series Switchboards only.
2Requires fuse protection and other components; refer to accessory detail for additional information.
Distribution Cable Harness