GE Aftermarket Catalog

26 / 202

Components: Parts1
Aftermarket Catalog 1-14 Prices and data subject
to change without notice
Molded Case Circuit Breakers
Power Management System Accessories
Spectra® RMS Circuit Breakers with MicroVersaTrip® Plus and MicroVersaTrip® PM Trip Units
All Devices UL Listed for Factory or Field Installation (UL File No. E-57253)
Voltage Modules
The Voltage Module is used primarily as a Spectra® Series Switchboard component
to provide +24 Vdc Control Power to Spectra® RMS Molded Case Circuit Breakers with
MicroVersaTrip® Plus or MicroVersaTrip® PM Trip Units via the Distribution Cable System.
The Module also provides voltage sensing signals to Spectra® RMS Molded Case Circuit
Breakers with MicroVersaTrip® PM Trip Units on the same Distribution Cable System. The
Module contains both a Power Supply Plate and a Voltage Conditioner as integral com-
ponents. It also includes fuse protection for the AC source input terminals (the modules
pressure connectors which mate with the switchboard interior bus bars). A GE POWER
LEADER® Network (commnet) connection is provided as well as supplemental 24 Vdc
input terminals for backup control power applications. Seven versions are available. Not
suitable for 400 Hz.
List Price
Voltage Rating and Service Type Comments Product Number GO-135PM
120 Vac Wye system Phase to Neutral potential ADSVMA120Y $2350.00
208 Vac Wye system Phase to Phase potential ADSVMA208Y $2350.00
240 Vac Delta system Phase to Phase potential ADSVMA240D $2350.00
277 Vac Wye system Phase to Neutral potential ADSVMA277Y $2350.00
480 Vac Wye system Phase to Phase potential ADSVMA480Y $2350.00
480 Vac Delta system Phase to Phase potential ADSVMA480D $2350.00
600 Vac Delta system Phase to Phase potential ADSVMA600D $2350.00
Note: The Voltage Module has the maximum capacity to power a Distribution Cable System consisting of 20
breakers and has a maximum system cable length of 40 feet.
Voltage Module Exterior View Voltage Module Interior View
Voltage Conditioner Assembly
Voltage Conditioner Assembly
The Voltage Conditioner Assembly is used to provide voltage sensing signals to Spectra®
RMS Molded Case Circuit Breakers with MicroVersaTrip® PM Trip Units via the Distribution
Cable System. The Voltage Conditioner Assembly requires a control power source of +24
Vdc to operate properly (the Power Supply Assembly or Power Supply Plate can provide
this required input). The unit also requires 120 Vac voltage inputs from the secondary
of three 1-VA high accuracy potential transformers (not included). The primary side of
the potential transformers must be fused with three, 1/2 ampere class CC fuses (not
included). A GE POWER LEADER® network (commnet) connection is provided. Not suitable
for 400 Hz.
List Price
Description Voltage Rating Product Number GO-135PM
Requires 120 Vac voltage inputs from the 120 Vac SVCAA $680.00
secondary of three 1.0 VA high accuracy
potential transformers
Note: the Voltage Conditioner Assembly has the maximum capacity to power a Distribution Cable System
consisting of 20 breakers and has a maximum system cable length of 40 feet.