CAPITAL EQUIPMENT NEWS
JUNE 2015
13
where there is no electric supply and thus
giving the flexibility and versatility of current
standard models.
In applications where a full train is powered
by the on-board gen-set configuration the
crushers generate sufficient energy to en-
able the operator to run the FINLAY 694+
dual power inclined screen for ‘free’ when
used in conjunction with the J-1175 dual
power jaw crusher.
“We are excited by the introduction of these
new models to the South African market-
place. The crushing and screening models
are already well respected and the flexibility
of dual power will only enhance their repu-
tation with operators in the market. We’ve
already had a positive response from our
customers and are confident that this will
result in firm orders in the near future,” re-
marks Paul Chappel, FINLAY Regional Sales
Manager.
The dual powered FINLAY J-1175 jaw crush-
er offers operators the flexibility to power the
plant either by mains electric connection or
the onboard gen-set power pack configura-
tion. Either power option presents operators
with significant power, servicing and mainte-
nance cost savings in direct comparison to a
diesel/hydraulic powered plant.
The plant incorporates the robust and re-
nowned JW42 high performance electri-
cally driven single toggle jaw chamber and
a heavy duty VGF feeder to give optimum
production in quarrying, mining, demolition
and recycling applications. Additional bene-
fits include rapid set up time, ease of main-
tenance, high reduction ratio, high output
capacity and advanced electronic control
system.
The jaw chamber is hydrostatically driven,
which offers operators reversible oper-
ation for clearing blockages that may be
experienced in demolition and recycling ap-
plications.
The hydrostatic system also provides vari-
able chamber speed to suit given applica-
tions. Chamber CSS (Closed Side Setting)
adjustment is fully hydraulic, and can be
changed in a matter of minutes.
The dual powered FINLAY C-1540 cone
crusher offers operators the flexibility to
power the plant either by mains electric
connection or the onboard gen-set power
pack configuration. Either option presents
operators with significant power, servicing
and maintenance cost savings.
This energy efficient and productive ma-
chine incorporates the proven Terex
®
1000
cone crusher with direct electric drive, auto-
matic tramp relief and hydraulic closed side
setting (CSS) adjustment.
The dual powered FINLAY C-1540 can be
fitted with an optional patented pre-screen
module which allows fines materials to
bypass prior to being fed to the crushing
chamber. This offers better wear rates in the
crushing chamber. The fines materials can
also be prepared separately and discharged
via the optional on-board side conveyor.
The large hopper/feeder has automat-
ed metal detection and a purge system to
protect the cone and reduce downtime by
removing metal contaminants via the purge
chute.
The FINLAY 694+ dual power inclined
screen provides customers with the option
of running this class-leading machine by ei-
ther diesel or electric mode, depending on
the resources available at each site. In terri-
tories with wide disparities in quality of fuel
or where the cost of fuel is an issue versus
electricity prices, the machine will also have
particular advantages.
As standard, the FINLAY 694+ dual power
uses 2 x 37 kW IE2 Electric motors, which
operate at 50 Hz and are suitable for most
regions. However, a 60 Hz and/or IE3 set-up
can be configured to suit particular regions
such as the USA.
The intuitive and user friendly electrical and
hydraulic system allows the customer to
switch between diesel and electric mode at
the flick of a switch. The primary operation
and control of the machine remain the same
regardless of the selected power. It is pos-
sible to power this 694+ inclined screener
using the onboard gen-set of the J-1175
dual power crusher. This means that oper-
ators can essentially run the screener free
of charge.
The FINLAY 694+ dual power features a
large 6.1 m x 1.525 m (20’ x 5’) triple deck
inclined screen, giving a total screening area
of 28m² to provide efficient screening and
high capacity.
b
CONSTRUCTION: ROAD BUILDING
CONSTRUCTION
The dual powered FINLAY
C-1540 can be fitted with an
optional patented pre-screen
module which allows fines
materials to bypass prior to
being fed to the crushing
chamber. This offers better wear
rates in the crushing chamber.