TPT March 2015

60 / 108

58 March 2015
Technology News
International
Trade Fair for
Metallurgy, Machinery,
Plant Technology
and Products
International
Trade Fair for
Aluminium and
Non-Ferrous Metals,
Materials, Technologies
and Products
Krasnaya Presnya
Moscow, Russia
The International
Tube and Pipe
Trade Fair in Russia
8–11 June 2015
In co-operation with
Messe Düsseldorf GmbH
P.O. Box 101006 _ 40001 Düsseldorf _ Germany
Phone +49(0)211/4560-7700/-7779 _ Fax +49(0)211/4560-8529
_
METALLURGY TUBE ALU Russia 2015 Anz 87x260mm.indd 1 14.10.14 15:59
Fully customised
large diameter
pipe mills from
Austria
PRODUCERS of large diameter pipe always require
customised solutions whether for pipe cutting, longitudinal
seam preparation or for pipe-end chamfering, and this also
needs to be undertaken with high precision and at the lowest
possible running cost.
Mill providers often find Linsinger’s tailor-made design
appealing. Currently a plate milling machine PFM 90/600LL
and a pipe end bevelling machine RFM 56/12000 are being
completed for Haeusler, a company that frequently uses
Linsinger’s expertise.
In addition to the Linsinger KSS sawing machines for
steel billets and the Linsinger KSA saws for seamless tubes,
the Linsinger BFMK strip edge millers and the Linsinger
MC multi-cut parting saws have also been well proven in
many longitudinally welded pipe mills around the world for a
number of decades.
The specialised portfolio for large diameter pipe mills is
complemented by the Linsinger PFM plate edge milling
machines and the Linsinger RFM pipe end bevelling
machines.
The Linsinger PFM plate edge milling machine is used for
preparation of welding edge profiles. The machine works
with height copy milling units and is capable of maximum
cutting efficiency combined with minimum consumable
tooling costs.
Simultaneous milling of both longitudinal sides saves
time and money. The profile milling tools made by Linsinger
enable virtually any geometry to be milled with high precision
and speed.
The Linsinger RFM pipe end bevelling machine enables
simultaneous chamfering of both pipe ends by a single
operator.
The chamfered pipe surpasses API specifications and
the long tool life ensures lowest possible running cost.
The movable milling units chamfer a range of pipe lengths
and the internal copy tools guarantee consistent chamfer
geometries.
The RFM pipe end bevelling machine chamfers
diameters between 16" and 90" with practically no burr. The
backlash-free Linsinger patented DPD double power drive
transmission system uses twin motors, small flanges and
high torque for absolute precision.
All Linsinger machines are pre-assembled, tested and
inspected by buyers in the factory in Austria prior to delivery
to the relevant factory.
Linsinger Maschinenbau GmbH – Austria
Fax: +43 7613 8840 951
Email:
Website: