77 / 84
new products
superior package to create new power solutions that are
more robust and cost-effective than competing products.
ST is currently ramping up production of TO-220FP wide
creepage power transistors to support a major global
television manufacturer. The product portfolio includes
four fully qualified 600V low-RDS(ON) MDmesh™ M2
MOSFETs with current ratings from 8A to 34A. The
1500V STFH12N150K5 and 1200V STFH12N120K5,
MDmesh K5 devices, will be qualified by the end of Q3
2016.
For further information please visit
www.st.com/mosfet.XP power launches high efficiency 40/50
Watt DC-DC converter series in compact 2 x 1
inch footprint
XP Power today announced the JWL and JSK series
of regulated, highly efficient, typically up to 92%,
metal cased 40/50 Watt DC-DC converters. Offering a
variety of input voltage range and single or dual output
combinations, both series fit the industry standard 50.8
x 25.4 mm footprint and pin outs. With their compact
dimensions they are ideal for use in a broad range of
mobile and portable board mounted applications that
require a high power density, up to 50 Watts output and
1,500 VDC input to output isolation.
The 40 Watt JWL40 and the 50 Watt JWL50 both have
two ultra-wide 4:1 input ranges offering 9 – 36 VDC or
18 – 75 VDC that cater for all popular nominal input
voltages. The JWL40 features single or dual output
models. Singles cover all popular output voltages in
the range 3.3 to 24 VDC, and duals +/- 12 VDC or +/-
15 VDC. The JWL50 is a higher power single output
version of the JWL40.
The JSK50 is a 50 Watt single output device that has
wide 2:1 input voltage ranges of 9 – 18 VDC, 18 –
36 VDC and 36 – 75 VDC. Like the JWL40/50 series
output models cover most standard requirements in the
range from 3.3 to 24 VDC. The JWL50 and the JSK50
are equipped with a voltage trim function that allows
adjustment of the output +/- 10% of nominal output in
order to accommodate line losses or non-standard
voltages.
All models can operate over the extended operating
temperature range from – 40 to + 105 degrees C. An
optional clip-on heatsink, specified when ordering (-HK),
enables full power at an extended temperature range.
Input to output isolation of 1,500 VDC is standard across
the range. A remote on/off input pin allows control and
sequencing of the converter from host applications.
The JWL/JSK series is available fromFarnell, element14,
Digi-Key, approved regional distributors, or direct from
XP Power and come with a 3 year warranty.
Compact 1 W and 2 W DC-DC converters
target medical applications
XP Power today announced the IMM series of 1 and 2 Watt
DC-DC converters. The IMM01 1 Watt and the IMM02 2 Watt
converters are designed for use in medical applications.
Providing a 1500 VAC input/output isolation at a 250 VAC
working voltage to facilitate a 1 x MOPP the single and dual
output units are approved to the international medical safety
standards ANSI/AMII ES60601-1, CSA 22.2 No 60601-1
and EN/IEC60601-1.
The IMM01 and IMM02 are available with a choice of two
2:1 input voltage ranges based around a nominal 5 VDC (4.5
to 9.0 VDC) and 12 VDC (9.0 to 18.0 VDC) inputs. Single
output models provide the popular nominal outputs of +3.3,
+5, +12 or +15 VDC. Duals provide the combinations of +/-
3.3, +/- 5, +/- 12 or +/- 15 VDC.
New-Tech Magazine Europe l 77