TPT July 2011

73 / 184

July 2011 71 ›
T echnology Update
V A L C O M . f r
-photoDanielLattard
ORBITAL
CUTTING
1
1 machine = 3 applications
tel +33 475 575 070 - commerce@axxair.com
w w w . a x x a i r . c o m
GLOBAL PROCESS
A step ahead
technology
ITL provides single point service, and is a one–stop centre for setting
up an entire tube manufacturing plant. The company can undertake
total turnkey projects for setting up the entire tube production line.
In order to provide customers with complete solutions,
ITL ventured into the manufacturing of equipment such as
slitting machines, cut to length lines, end-facing and chamfering
machines, high pressure hydro testers, pipe threading machines,
and galvanising plants, and even started taking up green field
projects on entire turnkey basis.
The company’s tube and pipe manufacturing machine division’s
related products include tube mill – ERW from ½" to 20"; tube mill
– ERW up to 20" to produce API grade pipes; tube mills to produce
stainless steel pipes from ½" to 8"; tube mill rolls; cut to length line;
slitting line – For CR and HR slitting; burr-free fly cut-off – up to
20 cuts per minute of 6mm length; hydro tester – 8" to 20", up to
250kg/cm2 force pressure; end-facing and chamfering machine up
to 20" capacity; tube straightening machines – 6 rolls, 10 rolls and
14 rolls; draw benches with up to 100 ton capacity; galvanising
plant for pipes; pipe threading machine up to 6"; and hydraulic tube
pointing machine.
ITL Industries Limited – India
Website:
Tube manufacturing
equipment from India
Diameter gauges
with fault detection
ZUMBACH Electronics introduces the new ODAC® F line of laser
gauges. These new series offer high-precision, non-contact laser
diameter measurement with extremely high scan rates and an
integrated fault detection function.
Thanks to the ultra high scan rates and single scan function,
these scanners are, in addition to the standard diameter
measurement, especially suited for efficient fault detection (lumps/
neckdowns) for cables with bigger diameters at a medium line
speeds. Therefore, a separate and conventional fault detector
becomes needless for such applications.
Combined with the powerful Zumbach USYS processors we
can process up to 4500 measurements per second from 3-axis
scan¬ners. A special laser beam geometry enables the detection
and process of very small defaults or diameter variations.
Up to 333 data packets per second can be processed forward to
a higher level system. Our data packets can include, amongst others,
min. & max. diameter values, ovality, etc. A complete line of gauges
is available for dimensions between 0.25 to 550mm (.01 to 21.65").
The main advantages are: double or even higher scan rates
than before, ie more measurements per time unit; maximum fault
detection (lumps/neckdowns) at increased line speeds; and FFT/
SRL analysis with higher bandwidths.
Zumbach Electronic AG – Germany
Email:
Website: