88 / 443
Installation
15
2.7
Sensing Element Connection (Continued)
Housing and
Bracket are
shown rotated
90º for clarity.
GSC
G=Ground
S=Shield
C=Center
NOTE:
CLIPPED SHIELD WIRE
MUST NOT TOUCH
CONDULET HOUSING
SHIELD WIRE MUST BE CLIPPED BY USER
Figure 2-7
Sensing Element Connection (Remote Mounting)
For IntelliPoint RF instruments that are mounted remotely
from the sensing element, the cable connections from the
sensing element to the electronic unit are made to the terminals
on the sensing element side of the housing (marked on label).
See Figure 2-7
. Connect Green (Ground) wire to Green screw,
Red (Shield) wire to red screw, and Blue (Center) wire to blue
screw.
See Section 6.4 for Spark
Protection, Mounting and
Wiring