266 / 2440
5
Edition 47 5-91
Millyards
Stationary Mount
Knuckleboom Loaders
Lift and Range Diagram
●
519 SM Knuckleboom Loader
●
519 SM/EHC Knuckleboom Loader
1.5 m/5'0"
3 m/10'0"
4.6 m/15'0"
6.1 m/20'0"
7.6 m/25'0"
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
7.6 m
5021
11,060
(25'0")
4368
9,622
6.1 m
5177
11,402
4486
9,882
(20'0")
4504
9,920
3903
8,597
4.6 m
5311
11,698
4634
10,207
(15'0")
4620
10,177
4032
8,880
3.0 m
3788
8,343
5854
12,894
4799
10,571
3962
8,728
(10'0")
3295
7,258
5093
11,218
4175
9,197
3447
7,593
1.5 m
7229
15,923
5951
13,107
3890
8,568
(5'0")
6289
13,853
5177
11,403
3384
7,454
0 m
8730
19,229
6469
14,249
4061
8,946
(0'0")
6603
16,729
5628
12,397
3533
7,783
–1.5 m
4764
10,494
8057
17,747
5811
12,800
3040
6,697
(–5'0")
4145
9,130
7010
15,440
5056
11,136
2645
5,826
–3.0 m
3050
6,718
6276
13,824
6152
13,552
4083
8,993
(–10'0")
2654
5,845
5460
12,027
5353
11,790
3552
7,824
–4.6 m
3494
7,697
2564
5,648
(–15'0")
3040
6,696
2231
4,914
519 SM/519 SM/EHC
8.2 m (27'0") Boom
NOTES:
Do not attempt to lift or hold any load that is greater than the rated values over the end or
side at their specified lift point and height.The weight of the grapple and all lifting accesso-
ries must be deducted from lift capacities shown.
1. All figures shown in these charts represent rated lift capacities.
2. Capacities shown in italic are 100% of hydraulic capacity; other capacities shown are 87%
of hydraulic capability.
3. The lift point is located at the boom/grapple pivot pin.
4. Manufacturer assumes no responsibility for the proper fit or structural integrity of the
mounting pedestal and/or platform supplied by the customer.
5. Operator should be fully acquainted with the Operator’s Manual and all safety instructions
furnished prior to operating the machine.
6. Lift capacities are in compliance with SAE J2417, “Lift Capacity Calculation Method —
Knuckleboom Log Loaders and Certain Forestry Equipment.”