WCA January 2009

40 / 61

and
Wire & Cable ASIA – January/February 2009 38
This is Teurema’s rolling line for the production of smooth and/or ribbed wires.
The line is extremely compact and equipped with protections to safeguard the
operator. In the basic version, the line is provided with vertical or horizontal
spooler for the production of spools or coils. It can also be used for the in-line
supply of the wire mesh lines.
The wire rod, from the coil positioned on the tilting fingers, will run through the
vertical static payoff, the mechanical descaler, the lubricant adding unit and
the Eurolls rolling cassettes, until it reaches the capstan that guarantees the
necessary pulling force for the cold rolling deformation. A spooler positioned
after the bullblock will collect the wire.
Type: LG
Maximum coil weight: 3,000 kg
Inlet wire rod: from diameter 5.5 to diameter 16mm
Outlet wire: from diameter 4mm to diameter 14mm
Wire reducing by means of cassettes
AC speed variable motors
Cabinet
Line components:
tilting fingers 1.
vertical static payoff with the possibility of adding a double pulley system in 2.
case of high payoff speed
compact module housing the mechanical descaler, the lubricant adding unit 3.
and the support for Eurolls cassettes type A or B
compact module housing the bullblock with capstan and stress relieving 4.
device and possible support for cassettes in case of double pass
(5a/5b) Vertical and horizontal spooler 5.
The following parts can be supplied as options:
(A) straightening panel
(B) revolver for cassette quick change (in substitution of fixed support)
(C) automatic discharger for fixed and/or collapsible spools (in case of
automatic vertical spooler)
Teurema Tecnica Europea de Maquinaria SL – Spain
Fax: +34 943 518807
Email :
Website :
Cold rolling lines
Teurema’s LG cold rolling lines ❍ ❍
Fine metal
wire drawing
Shanghai Lizhi Machinery Co Ltd
is specialised in the research and
development of micro-fine and fine
metal wire drawing and annealing
equipment for precious metal, non-
ferrous metal, ferrous metal and
stainless steel.
The LZDM-80/21 wiredrawing 1.
machine is suitable for drawing
extremely thin, precious metal
wire rod.
The maximum inlet diameter is
0.12mm with a minimum finished
wire diameter of 0.015mm. The
machine speed is 600 metres
per minute. The drawing process
is completely automatic, with
a PLC-programmed control
system. Ten pre-programmed
operations can be stored.
The LZDM-80/21 precious metal thin ❍ ❍
wiredrawing machine
The LZDM-480/01 is suitable for 2.
drawing extremely thin, precious
metal wire rod bus bar. The
maximum inlet wire diameter is
8mm with a minimum finished
wire diameter of 1.5mm.
The machine speed is 50-80
metres per minute. This single-
drum wiredrawing machine grad-
ually decreases the wire diameter
by threading wires through one
die until the target wire diameter
is reached.
Settings such as drawing speed
and traverse pitch can be set
up for every process via a touch
panel on the 10.4" colour touch
screen.
Shanghai Lizhi Machinery Co Ltd
– China
Fax: +86 21 5284 4396
Email:
Website: