89 / 112
87
Section 4.F.2.d.
d.
Trim: Where trim is used, it shall be a color that complements the building’s
primary color. Neon tubing shall not be allowed as an exterior trim or accent
material. All door and window trim must reflect the style of trim of the entire
building and complement the front façade design.
Metal Trim (Pre-Bent or Coil
Stock) is only permitted for rake and horizontal roof trim. Metal Trim shall
be painted and a minimum of .024” thick.
Section H.2.a
a.
PitchedRoofs: Buildings shouldbe designedwithpitched roofs. Where pitched roofs
are used, the minimal pitch shall be at least
5/12
. Projecting rooflines shall be
designed to create strong shade/shadow patterns.
Where pitched roofs are used,
the design shall create no horizontal line greater than 100 feet, without an
architectural break using features found on traditional NewEngland buildings.
Section 6.D.I
Maximum Sign Sizes
1. Sign Dimensional Chart
The following chart summarizes the maximum gross area (in square footage) that
is permitted for signage by type of sign design.
MAXIMUM SIGN SIZES – Freestanding (FS) / Wall-Mounted (W)
TYPE OF SIGN DESIGN
REF
MAX. DIM.
(FS) (W)
TEMPORARY SIGNS:
Advertising retail
Gross Area
32 sf
Advertising retail in the Village Zone
Gross Area
8 sf
…
ADVERTISING/RETAIL SIGNS:
Advertising Freestanding Signs
Gross Area FS
100 sf
Length FS
16’
Heights FS
16’
Advertising Freestanding Signs in the Village Zone Gross Area FS
24 sf
Length FS
8’
Heights FS
8’
Advertising Wall Signs in the Village Zone
Gross Area/bldg.
3 sf
Advertising Wall Signs
Gross Area/bldg.
100 sf
Face: wall (see note 5)
Combined Gross
150 sf
Area Corner Lot (see note 4)