1541 / 1618
9/101
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Soldering/Welding/
Workshop Equipment
9
Design:
Mineral granulate based on calcium silicate hydrate type III R. Absorbing or chemical
binding of organic and inorganic compounds, such as oils, used oils, greases, lubricants, alkalis,
paints, lacquers, solvents, hydrocarbons. Avoid contact with strong acids and oxidising agents.
Non water-repellent and non-buoyant. Bulk weight: approx. 680 g/l, 1 litre of oil binder binds
0.48 litres of fuel oil, grain size: 0.125-1 mm.
Area of application:
Binds oils and other liquid spills, suitable for traffic areas. For the cleaning
and securing of industrial floors and to scatter dangerous traces of oil on roads and taxiways.
Order
No.
Design
9808
Colour
0020
20 kg sack (29 litres)
14.70
Beige-grey
(W980)
Oil binding agent
Design:
Clay-based oil and chemical binding agent (mol granulated, Type III/R. Binds acids,
base/alkaline substances (alkaline solutions) for flammable, combustible, aqueous and
polar liquids. Suitable for traffic areas. Bulk weight: approx. 500 g/l, 1 litre of oil binder
binds 0.5 litres of oil, grain size: 0.5-1 mm.
Application:
Binds oil, grease, lubricant and petrol, and other leaked liquids.
Order
No.
Design
9808
Colour
0030
20 kg sack (40 litres)
23.00
red
(W980)
Oil binding agent
Design:
PU-foam granules Type III/R, road- and rain-worthy, for all traffic areas. Water-
repellent. Very absorbent, odour-neutralising, long storage life, soil conserving. Lower disposal
costs thanks to lightweight product. Bulk weight: approx. 405 g/l, 1 litre of oil binder binds
0.6 litres of oil, grain size: 0.5-4 mm.
Application:
Binds oil, grease, lubricant and petrol, and other leaked liquids.
Order
No.
Design
9808
Colour
0040
19 kg sack (40 litres)
17.45
dark beige
(W980)
Oil binding agent
Design:
Temperature resistant from –25 °C to +80 °C, good protection from seawater and salt
air, good atmosphere-resistance.
Application:
For lubricating rolling and plain bearings, even in mixed-friction areas, especially
grease lubrication for all permissible running speeds. Corrosion protection of sliding parts,
especially cable. Excellent corrosion protection against exposure to aggressive water, gases and
alkalis.
Ideal for open gears, screws, hinges, bearings, plain bearings and water pumps, water turbines,
sluice gates, car washes, cylinder guides, lead screws, screws in underwater equipment,
offshore components, lifting equipment, containers and trailer lashing equipment, yachts and
shipyard supplier components.
Order
No.
Design
9810
PU
1300
300 ml spray can
9.05
12
(W980)
High-pressure adhesive grease
Design:
Temperature resistant from –30 °C to +110 °C, moisture-inhibiting, rust-loosening and
water-repellent. Very good adhesion, also does not run off warm surfaces.
Application:
Suitable for loosening. Very adhesive long-life grease for lubricating cars,
motorcycles, bicycles, appliances and lots more. O/X-ring tested. Ideal for chains, wire ropes,
all kinds of rods, O-rings, hinges, joints, ball bearings, cable pulleys, door locks, bicycle and
worm gear of all kinds.
Order
No.
Design
9812
PU
0500
500 ml spray can
6.65
12
(W980)
Chain adhesive spray
m
m
Oil binding agent/greases and lubricants
1541