645 / 1618
3/123
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Clamping
Systems
3
Design: Protection class IP 67.
Precise Universal 3D probe for
incorporating in the milling spindle or countersunk head; the
spindle axis is positioned accurately on the workpiece or device
edges. Any approach direction (X, Y, Z-axis). The dial gauge always
deflects in the same direction and indicates the distance between
the spindle axis and the workpiece edge. As soon as the display
is set to zero, the spindle axis is positioned without prolonged
attempts; without calculations, without sign problems, precisely
on the edge of the workpiece. This reduces the additional costs.
increases productivity and relieves employees. The probe tip is
changed without requiring a tool; recalibration of the probe is not
necessary. The enlarged travel path in combination with the tried
and tested predetermined breaking point provide additional safety.
For maximum measuring accuracy, all universal 3D probes are
individually measured and aligned during installation. For extremely
easy handling, the Universal 3D probe is available with an
integrated steep taper adaptor (Order No. 3770 0010). The steep
taper (DIN 69871, SK 40) and Universal 3D probe form one unit.
Application:
For setting workpiece zero points and length
measurements on milling and grinding machines (insulated probe
tip) as well as for centring holes and spindles.
Scope of delivery:
3D probe and short probe tip ∅ 4 mm.
Note:
The new generation probe tips are also compatible with
existing Universal 3D probes. Replacement probe tip
(Order No. 3777
Ç
3/125).
Order
No.
Shank ∅
3770
Ball tip ∅
mm
Display accuracy
mm
Housing ∅
mm
Length without clamping shank
mm
0005
20 mm
285.00
4
0.01
65
113
0010
SK 40/DIN 69871
307.00
4
0.01
65
113
(W392)
Universal 3D probe
Design:
Protection class IP 64. The digital 3D probe is a development
of the tried and tested mechanical 3D probe. The spindle or
countersunk head can be positioned quickly and reliably on the
reference edges. The start-up process can be traced accurately on the
digital dial gauge. The zero setting is found immediately. The machine
measuring system can be zeroed without calculations, as the spindle
axis stands directly on the probed edge. Digit height of the LC display
8.5 mm, in this way the values remain unambiguous and correctly
readable from a distance, even on large machining centres.
Function:
Switch-on and switch-off, mm/inch-conversion.
Application:
For setting workpiece zero points and length
measurements on milling and grinding machines (insulated probe tip)
as well as for centring holes and spindles.
Scope of delivery:
3D probe with battery and short probe tip ∅ 4 mm.
Note:
The new generation probe tips are also compatible with existing
Universal 3D probes. Replacement probe tip
(Order No. 3777
Ç
3/125).
Order
No.
Shank ∅
mm
3775
Ball tip ∅
mm
Display
accuracy
mm
Repeat
accuracy
mm
Measuring
accuracy
mm
Housing ∅
mm
Length without
clamping shank
mm
0005
20
506.00
4
0.001
0.001
0.005
65
113
(W392)
Digital 3D probe
IP 67
IP 64
Probe
645