646 / 1618
3/124
Clamping
Systems
3
Design: Protection class IP 67.
Further development of the Universal
3D probe, with improved mechanism and new, compact, handy
housing, for incorporating in the milling spindle or countersunk
head. The spindle axis is positioned accurately on the workpiece
or device edges. Any approach direction (X, Y, Z-axis). The large,
analogue 1/100 mm dial gauge (2 pointers) with marked travel path
(safety distance) always deflects in the same direction and indicates
the distance between the spindle axis and the workpiece edge.
As soon as the display is set to zero, the spindle axis is positioned
without prolonged attempts; without calculations, without sign
problems, precisely on the edge of the workpiece. This reduces the
additional costs. increases productivity and relieves employees. The
original Haimer probe tip for max. accuracy of 0.01 mm is changed
without requiring a tool; recalibration of the probe is not necessary.
The enlarged travel path in combination with the tried and tested
predetermined breaking point provide additional safety. For maximum
measuring accuracy, all 3D probes are individually measured and
aligned during installation.
Application:
For setting workpiece zero points, length and depth
measurements on milling and grinding machines (insulated probe tip)
as well as for centring holes and spindles. Also used for testing the
straightness and evenness of surfaces.
Scope of delivery:
3D probe with short probe tip ∅ 4 mm.
Replacement probe tip (Order No. 3777
Ç
3/125).
Order
No.
Shank ∅
mm
3777
Ball tip ∅
mm
Display accuracy
mm
Housing ∅
mm
Length without clamping shank
mm
0010
12
285.00
4
0.01
62
100
(W392)
3D probe NEW GENERATION
Zero Master analogue
Order
No.
Shank ∅
mm
3777
Ball tip ∅
mm
Display accuracy
mm
Housing ∅
mm
Length without clamping shank
mm
0000
10
285.00
4
0.01
49
96
(W392)
Design: Protection class IP 67.
Smallest 3D probe in the world, for
incorporating in the milling spindle or countersunk head; the spindle
axis is positioned accurately on the workpiece or device edges. Any
approach direction (X, Y, Z-axis). The size of the Zero Master is
adapted to small machines. The small, analogue dial gauge always
deflects in the same direction and indicates the distance between the
spindle axis and the workpiece edge. As soon as the display is set
to zero, the spindle axis is positioned without prolonged attempts;
without calculations, without sign problems, precisely on the edge of
the workpiece. This reduces the additional costs. increases productivity
and relieves employees. The clamping shaft has a diameter of 10 mm
and can therefore also be used on machines with SK 30 or with small
HSK spindles. Large workpieces can also be measured through the
shortened housing, which projects only a little way out of the spindle.
The probe tip is changed without requiring a tool; recalibration of
the probe is not necessary. The enlarged travel path in combination
with the tried and tested predetermined breaking point provide
additional safety. For maximum measuring accuracy, all 3D probes are
individually measured and aligned during installation. The Zero Master
can be equipped with a short (ball ∅ 4 mm) and a long (ball ∅ 8 mm)
probe tip. The probe tips are compatible with all other Haimer 3D
probes.
Application:
For setting workpiece zero points and length
measurements on milling and grinding machines (insulated probe tip)
as well as for centring holes and spindles.
Scope of delivery:
3D probe with short probe tip ∅ 4 mm.
Note:
Replacement probe tip (Order No. 3777
Ç
3/125).
IP 67
IP 67
Probe
646