77 / 84
new products
These cabling elements help transportation companies
maintain high safety standards, while also delivering on
customer conveniences, such as information displays
updated in real time and personal entertainment systems
for individual seats.
“As new coaches are being built or retrofitted, bus
manufacturers and suppliers face these two critical
priorities – how their cabling system can capture and
share the level of data that’s expected, and how it can
also meet safety requirements and regulations. Our
cables make both possible,” added Thabrew..
Molex ValuSeal IP65 Wire-to-Wire
Connectors, Now Available at Mouser Electronics
Mouser Electronics, Inc., the industry’s leading New
Product Introduction (NPI) distributor with the widest
selection of semiconductors and electronic components, is
now stocking the ValuSeal wire-to-wire connector system
from Molex, LLC. ValuSeal connectors are designed to
provide cost-effective, reliable, and sealed performance,
all within a one-piece housing design. The IP65-rated
wire-and-ring seal system is capable of 11.0 A of power
and is ideal for consumer, industrial, non-automotive
transportation, robotics, and lighting applications.
The Molex ValuSeal wire-to-wire connector system,
available from Mouser Electronics, features an
innovative one-piece housing design that simplifies the
assembly process and protects against harsh and wet
environments, dust, and low-pressure jets of water. The
design also boosts efficiency by reducing the number of
components needed. A compact 4.00mm pitch enhances
design flexibility in applications where space is limited.
The connectors also offer a positive latch feature that
ensures secure retention when the receptacle and plug
are mated, which prevents accidental un-mating
The ValuSeal wire-to-wire connectors also include an
integrated wire strain-relief within the connector body to
prevent over-bending, wire failure, and leak-paths. Mouser
also stocks ValuSeal pre-crimped leads that are suitable
for simplifying wire assembly for added cost efficiency.
For more information about the ValueSeal IP65-rated
wire-to-wire connectors, visit
http://www.mouser.com/new/molex/molex-valuseal-ip65-connectors/.
With its broad product line and unsurpassed customer
service, Mouser strives to empower innovation among
design engineers and buyers by delivering advanced
technologies. Mouser stocks the world’s widest
selection of the latest semiconductors and electronic
components for the newest design projects. Mouser
Electronics’ website is continually updated and offers
advanced search methods to help customers quickly
locate inventory. Mouser.com also houses data sheets,
supplier-specific reference designs, application notes,
technical design information, and engineering tools.
The new and inexpensive 2.5 A appliance
inlet of the type 2570 in various versions
The new and inexpensive 2.5 A appliance inlet of the
type 2570 in various versions
The appliance inlet series of the type 2570 by
SCHURTER provides various mounting variants and
terminal options. Because of its cost effective design
and the wide range of approval certificates for Europe,
America and Asia, the C8 inlet is best suited for both
industrial and consumer applications.
The appliance connector for snap-in mounting is
available with solder-, quick connect- or PCB-terminals.
The PCB-terminals in combination with the sandwich
mount are specially for the application on printed circuit
boards. This way the board can be fully equipped and
tested before being mounted. The mounting is done by
introducing the connector into the back wall, and placing
the appliance housing into the groove on the inlet.
Thanks to the use of rolled contact pins, the variants
with solder or PCB terminals are very inexpensive and
therefore suitable for consumer goods. Nevertheless do
New-Tech Magazine Europe l 77