© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
9.
Place a new retainer spring onto the
pressure plate.
NOTE: Brake pad retainer springs are pre-attached.
DO NOT REMOVE.
10.
Insert the pad retainer bar into the holes of the brake caliper.
11.
Push the pad retainer bar fully into the holes while pushing
downward so the retainer springs are engaged into the bar and
there is sufficient clearance to install the pad retainer bar
screw.
12.
Fasten the new pad retainer screw to the brake
caliper with the specified torque.
Installing the brake pads (3/4)