27 / 61
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
NOTE: The pressure plate must always be placed correctly in the guide groove and
is to entirely cover the machined surfaces.
1.
Manually move the brake caliper inboard
until there is sufficient clearance to insert
the pressure plate.
2.
Insert the pressure plate into the caliper.
3.
Slide the pressure plate up against the adjuster piston with the
adjuster piston pin fitting into the pressure plate slot.
NOTE: It may be necessary to move the brake caliper and / or rotate the
adjuster piston until the pin engages the slot of the pressure plate.
4.
Ensure the adjuster piston boot is not twisted.
Installing the brake pads (1/4)