26 / 61
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
1.
While checking the adjuster, restrain the
adjuster piston pin to prevent rotation and
damage to the adjuster piston.
NOTE: This can be accomplished by temporarily
installing the pressure plate.
2.
Use the adjusting wrench to turn the
adjuster clockwise towards the brake rotor.
Check for ease of movement.
3.
Following the test, rotate the adjuster piston
clockwise up to the stop position and back again.
4.
If necessary, check the adjuster. (Refer to slide 8)
Checking the adjuster unit