22 / 61
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
7.
To prevent rotation, use your hand to push the pressure plate
towards the inboard side, with the adjuster piston pin in the
pressure plate slot.
NOTE: Damage can occur to the boot if the piston is allowed to rotate.
8.
Use the adjusting wrench to turn the adjuster counterclockwise
as far as it will go. Then turn the adjuster clockwise ~90
degrees.
9.
Check adjuster boot for wear and damage.
Replace if damaged or worn.
10.
Manually push the brake caliper outboard
and remove the outboard brake pad.
Removing brake pads (3/4)