17 / 61
© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
Checking guide pin bearing play (2/2)
6.
Press the dial indicator against the measuring point on the
brake caliper.
7.
Apply force to tilt the caliper as far as possible
toward axle, and set the dial indicator to zero.
8.
Apply force to tilt the caliper as far as possible
in the opposite direction.
9.
Read the dial indicator. The bearing play must
not be greater than 0.08” (2 mm).
10.
Replace the guide bushings if the measured play is greater than
0.08” (> 2 mm).