© 2015 Hendrickson USA, L.L.C. All Rights Reserved
CONFIDENTIAL
Inspecting the Rotor (2/2)
Checking the runout of the brake rotors
1.
Fasten the dial indicator to the
brake caliper.
2.
With the rotor installed, check the
runout by rotating the wheel hub.
Max value = 0.006” (0.15mm).
3.
Replace the brake rotor or have it
properly resurfaced if the runout is
more than 0.006” (0.15 mm). Also replace if, after resurfacing,
the thickness is below the allowed minimum.